it has adkdgbsgbsd'g SD
To separate 10 dots with 4 lines, you can create a square with 4 dots at the corners and one dot in the center. This arrangement allows each line to intersect with at least 2 dots, effectively separating all 10 dots.
You need to know diameter of each circle, which are different for each circle; each circle circumference is pi x diameter where pi = 3.14159
A standard six-sided die (dice) has a total of 21 dots. This is calculated by adding the number of dots on each face: 1 + 2 + 3 + 4 + 5 + 6 = 21.
No, the circle is inscribed in the quadrilateral.
i think 25 im pretty sure there are 5 rows of 5
Your brakes need servicing.
If I am not wrong, no matter how many dots you have in that circle, it will have infinite lines. All circles have infinite straight lines.If you are talking about other lines and not straight lines, then my answer is not applicable.Assuming you mean to ask, "How many times can I connect ten dots on the outer edge of a circle?", then the answer is 42. If you're not connecting dots immediately next to each other, then you can draw only 32 lines.
There are four speed sensors on a 99 BMW 328i. One sensor is located on each of the four wheels.
A pair of dice has a totla of 42 dots, 21 on each die.
you draw two circles beside each other and then put three dots in them then you make a triangle above the circles then draw a loop for the tongue and then draw half a circle from one circle to the other then draw some eyes and make some ears.
it has adkdgbsgbsd'g SD
You start by drawing a circle then draw 3+ dots on the circled edge, next connect all the dots with each other but don't go over the same line twice. for a 4 dotted circle you should end up with 6 lines altogether and with 5 you should have 10 lines altogether also 6-15 7=21 10=45 11=55 12=66
it means 2 dots open each door it a ridol so 2 dots open 1 door 4 dots open 2 doors and 6 dots open 3 doors
To separate 10 dots with 4 lines, you can create a square with 4 dots at the corners and one dot in the center. This arrangement allows each line to intersect with at least 2 dots, effectively separating all 10 dots.
Three of the dots are the vertexes of an equilateral triangle, the other three dots are the midpoints of the triangle's sides and the seventh dot is the centroid.
You need to know diameter of each circle, which are different for each circle; each circle circumference is pi x diameter where pi = 3.14159