0
What gauge underground wire for 110 volt 15 amp 700 ft for a pond pump?
Wiki User
∙ 12y ago
A #1 copper conductor will limit the voltage drop to 3% when supplying 15 amps for 700 feet on a 120 volt system.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Which gauge wire is a 12v?
The gauge of wire that is 12 volt is 18, 14, and 16.
What is more efficient to run a pool pump on 120 Volt or 240 Volt?
240
What gauge wire for 220v 60a underground run of 260 feet ocation South Georgia?
A #2 copper conductor will limit the voltage drop to 3% or less when supplying 60 amps for 260 feet on a 220 volt system.
How many watts is a 240 volt 20 amp fuse rated for with 12 gauge wire?
4800
What is the proper size wire cord for a 12 amp vacuum sweeper 120 volt?
16 gauge is rated at 13 amps, but I would use 14 gauge which is rated at 15 amps just to be safe.
Which gauge wire is a 12v?
The gauge of wire that is 12 volt is 18, 14, and 16.
How much voltage for fuel pump on a 1993 mercury topaz?
Well, If you mean the fuel pump in the fuel tank, it is a 12 volt pump. The pump runs with the 12 volt system of the car.
Can you run a 12 volt ac water pump with a 12 volt dc adapter?
No. You need 12 volt AC to run a 12 volt AC motor, not 12 volt DC.
What happens when a 110 volt breast pump is plugged in 220 volt outlet?
zzzzzzzzzzzAAAAAAAAAAAAAAAPPPPPPPPPP !!!!!
What is more efficient to run a pool pump on 120 Volt or 240 Volt?
240
Why does volt gauge read high?
Because the voltage is high?
What gauge wire for 240 volt 30 amp 55 ft?
10 gauge will work fine.
What gauge wire for a 220 volt 60 amp underground in conduit at 100 feet?
Might depend on your local codes, but here it is 6 AWG wire. <<>> A #4 copper conductor will limit the voltage drop to 2% or less when supplying 60 amps for 100 feet on a 230 volt system.
Can you operate a 24 volt sump pump with 12 volt battery?
No, you will need two 12 volt batteries connected in series to give the 24 volts necessary to run the pump. It will not run on 12 volts.
How do you test a fuel pump that has been removed from the tank of a 1990 Isuzu Trooper?
AnswerPut some gasoline in a bucket, put the pump in the bucket and use a 12 volt battery to put the pump on. Use a pressure gauge. Put in the output of the hose from where the gasoline will come, and check how many psi the gauge show, I think it has to be 20 or 40 psi.I would use kerosene for the test fluid; way less explosive!
How can you check a 1995 fuel injection system?
The pressure is checked with a gauge, the electronics are checked with an appropriate scan tool and a volt/ohm meter.The pressure is checked with a gauge, the electronics are checked with an appropriate scan tool and a volt/ohm meter.
What gauge wire for 220v 60a underground run of 260 feet ocation South Georgia?
A #2 copper conductor will limit the voltage drop to 3% or less when supplying 60 amps for 260 feet on a 220 volt system.
