answersLogoWhite

0


Best Answer

This is a voltage drop question and a voltage needs to be stated.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What gauge wire 800 watts in 100 feet?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What gauge wire do you need for 100 watts over 10 feet?

To answer this question a voltage has to be stated.


What gauge wire do you need to run a 30 amp circuit 100 feet?

8 ga


What gauge wire required to go 50 feet for a 100 amp service?

AWG # 4 copper.


What length of 15 gauge wire will be use to fit up 20 light socket with 100 watt in an area of 4026?

It is not clear what you're asking. First of all, 15 gauge wire is not readily available, if at all. Wire gauges 14 and 16 are. Beyond that, you seem to be asking what length one would need to wire 20 sockets for either 100 watts each or total in an area of 4026. There are two problems. Is it 100 watts per socket or 100 watts total? And, in an area of 4026 ...square feet? ...square meters ...square kilometers? ...square centimeters? ...which is somewhat of a problem in itself. This question is in "Residential Electricity", and as such one does not specify lengths of wire required by what area is required to be lighted up, but by how many light fixtures (sockets) would be required and how far apart they would be.


Is a 12 gauge wire on 20 amp breaker safe for a sub panel?

Yes, if you are running it no farther than 100 feet. If you are going over 100 feet use AWG # 10 wire on the 20 amp breaker.


What size wire for 100 feet 20 amp circuit to run pond fountain?

12 gauge underground wire or if you think you will ever add any devices to this circuit use 10 gauge.


What gauge wire should be used for a 480 volt 100 amp run of just under 100 feet?

A #3 copper conductor will do the job.


How much does 100 feet of 10 gauge copper weigh?

Depends on the thicknes of the wire. About three pounds, according to this site: http://www.rjleahy.com/Store/wire/cwi.htm See second chart on left... 10 ga copper wire is about 33 feet per pound.


What size wire IS needED FPR A 30 AMP OUTLET BOX?

It depends upon the length of the circuit, but for 50 feet or less a 10 gauge wire should be fine. A short length (15 feet), you could use 12 gauge. If you double the length to 100 feet, you should use 8 gauge. A rule of thumb is to drop down a gauge for every length that is doubled. There are wire size charts available on the internet. Some can be conservative such as recommending #8 for 50 ft or less at 30 amps. It is better to be conservative than to run too much amperage on a smaller wire that can cause a fire. As a general rule, 12ga wire can be used in house circuits for 20amps or less. 16ga wire can be used for 15 amps or less such as lighting circuits. That is considering lengths of less than 100 feet.


What gauge wire for a 220 volt 60 amp underground in conduit at 100 feet?

Might depend on your local codes, but here it is 6 AWG wire. <<>> A #4 copper conductor will limit the voltage drop to 2% or less when supplying 60 amps for 100 feet on a 230 volt system.


How is wire pulled into a conduit of 100 feet?

A 100 foot fish tape and wire lubrication will be needed to make this wire pull.


What wire size is used for 100 watt 12 volt lamp?

Volts * Amps = Watts 12 V * ?Amps = 100 Watts OR ? Amps =100W/12V OR 8.33 Amps = 100W/12V Use a 10Amp fuse inline and you can get by with 16Ga wire.