0
AWG # 4 copper.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the maximum breaker size for these gauges wire?
You listed no gauge wire. This is the required breakers.14 gauge - 15 amp12 gauge - 20 amp10 gauge - 30 amp8 gauge - 40 amp
What gauge wire for service entrance in Wisconsin?
Depends on the size of the service. 100 amp service will require 3 gauge, 150 amp service will require 1/0 gauge, and 200 amp service will require 3/0 gauge.
What gauge wire to use for 70 amp service going 200' underground?
I would recommend you use 1/0 gauge
What gauge wire is required to operate an emergency exit light?
#12 should be sufficient.
What wire gauge is needed to carry 150 amps at 240 volts?
At the service entrance you will need AWG 1/0 gauge.
What gauge wire is required for 15 amp service?
14-2
What gauge of cooper service wire for 200A service to meter box and service panel?
For a 200A service, the recommended copper wire gauge for service entrance cable is typically 2/0 AWG (American Wire Gauge). This wire size is able to handle the ampacity required for a 200A service safely and efficiently. It is always recommended to consult with a licensed electrician to determine the appropriate wire size for your specific installation.
What gauge electrical wire is required to upgrade your electircal service to 200A if your incoming service is underground?
4/0 Aluminum or 2/0 Copper type USE.
How many feet in 1 ounce of 20 gauge silver wire?
There are approximately 10.5 feet of 20 gauge silver wire in 1 ounce.
How many gauge is required of copper wire in multiple generator science project?
34 gauge copper wire will work but to use the 35 gauge copper wire is the best choice
145 feet run for 50 amp service what size wire?
For a 50 amp service over a 145 feet distance, it is recommended to use a 6 gauge wire to ensure proper voltage drop and safety. This wire size will help reduce resistance and prevent overheating of the circuit. Be sure to consult with a licensed electrician to confirm the appropriate wire size for your specific installation needs.
What is the maximum breaker size for these gauges wire?
You listed no gauge wire. This is the required breakers.14 gauge - 15 amp12 gauge - 20 amp10 gauge - 30 amp8 gauge - 40 amp
What gauge wire for service entrance in Wisconsin?
Depends on the size of the service. 100 amp service will require 3 gauge, 150 amp service will require 1/0 gauge, and 200 amp service will require 3/0 gauge.
What gauge wire is needed to run 200 feet and can carry 40amps?
4 gauge
What gauge wire do you use for 15 amps 200 feet?
For a 15 amp circuit over 200 feet, it is recommended to use a 14-gauge wire to ensure proper voltage drop. This gauge wire will help maintain the integrity of the electrical supply over that distance.
What gauge wire would I need for 2500 feet for 240 volts and 0.4 amps?
A #14 wire will do the job.
How many feet of 12 gauge wire makes a pound?
It completely depends on the gauge, or diameter of the wire. Some very large wires found in industrial plants can weigh more than a pound per foot, while very fine wire found in small motors can take several hundred feet to make a pound.
