0
9.6 inches equates to about 243.84 mm
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What artists did the song mm- mm- mm- mm- mm- mm in the 1960's?
The song "Mm Mm Mm Mm Mm Mm" was released in 1964 by Wayne Fontana and the Mindbenders.
What is 96 plus 96?
96+96=192
What is 96 cubed?
96 cubed is 96 x 96 x 96, or 884736.
What does 167mm equal to in mm?
167 mm in mm is 167 mm.
Is 6.3 mm or 3.5 mm larger or smaller?
6.3 mm is greater than 3.5 mm
Area of 96 mm and 51 mm?
Area = length x width so Area = 96 x 54 = 5184mm2
How many mm equals 96 inches?
3.75 inches .That is sure ! ...
What do 96 MM convert to in inches?
That question is a non-sequitur. A millimeter is a unit of length, and a cubic centimeter is a unit of volume, so they cannot be compared any more than you could ask "how many pounds are there in a foot?"
How many inches is 98 mm?
There are approximately 3.75 inches (3 and 3/4 inches) in 96mm. There are 25.4 millimetres in one inch. Therefore, to convert from millimetres to inches, divide by 25.4. In this instance, rounded to two decimal places, 96 / 25.4 = 3.78 inches. Direct Conversion Formula 96 mm* 1 in 25.4 mm = 3.779527559 in
How many mm is the stock throttle body on a 96 cubic inch harley motor?
50mm
What is the area of this rectangle in square millimeters 12 times 8?
It is: 12*8 = 96 square mm
What is the Diameter of a 93-96 KX 250 front forks?
the seals are 43 mm according to Kawasaki.
How many milimeters in 9.6 cm?
9.6 cm 96 mm
What is the maximum volume of a cylinder that can be encased into a square ended cuboid whose length is 60 mm with a volume of 96 cubic cm showing work and answer to the nearest hundredth?
Volume of cuboid = 96 cm^3 = 96000 mm^3Length of cuboid = 60mmTherefore cross-sectional area = 96000/60 = 1600 mm^2Then either the cuboid is 40 mm x 40 mm with a length of 60 mm orit is 60 mm x 60 mm square with a length of 1600/60 mm.It is possible to prove that the largest cylinder is one whose circular face [base] is parallel to the square cross-section.In the first case the cylinder has a radius 20 mm and height 60 mm => vol = 24000*pi mm^3, orthe cylinder is 30 mm * 30 mm and height 1600/60 mm => vol = 24000*pi mm^3.The question contains measurements in mm and in cm and so it is not clear what units the "nearest hundredths" refers to. Since I have done the calculations in mm, the answer is24000*pi = 75398.22 mm^3.
The length of a diagonal of a square is 24square root 2 millimeters find perimeter of the square?
The perimeter of a square with a diagonal length of 24 square root 2 millimeters (33.94 mm) is: 96 mm
How many Tech Decks 96 mm fingerboards can fit in the Tech Deck display case?
i think its 20 or18 look at TECH DECk.COM
8 inches equals how many inches?
10 mm = 1 cm 8 mm = 0.8 cm now 2.54 cm = 1 inch 0.8 cm = 0.8 / 2.54 = 0.31 inch Direct Conversion Formula 8 mm* 1 in 25.4 mm = 0.3149606299 in
