0
It is 16 inches on center. Your cripple stud is 2" wide. Consequently there is a 14 inch gap between each cripple stud
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How much Length of window jack stud?
That dimension will change with the size of the window and the header height.
The perimeter of a church window is 60 inches. If the window is in the shape of a regular pentagon what is the length of each side of the window?
12 inches
What is the length of a curtain?
It entirely depends on the size of the window. To measure the size of the window and the length of the curtain you need, visit superblindsmart.com.au/service-centre/how-to-measure-your-windows-for-blinds.html
How do you replace broken stud on 95 f 150 4x4?
Are you asking about a wheel stud or exhaust stud, please clarify
what- sam has 15 identical rectangular windows in his home. The length of each window is twice the width, and the area of each window is 8 square feet. Sam wants to ...?
$45
How much Length of window jack stud?
That dimension will change with the size of the window and the header height.
How do you calculate the length of a stud?
with a measuring tape
What is a cripple stud?
Short studs placed between the header and a top plate or between a sill and bottom plate. A short stud used above or below a wall opening. Extends from the header to the top plate or from bottom plate to rough sill.
How do you remove the manual window crank on a 1999 Pontiac Sunfire?
How do you remove the manual window cranThere should be an Allen type set-screw in the base of the handle. It will be recessed, and you'll have to turn the crank to access it more easily. Remove the setscrew, and the handle slips off of the stud. If the window is down, and it begins to rain, you can roll the window up by holding it onto the stud, and turning, or you can use a small pair of vise grips. Just try not to damage the teeth on the stud.
Is it wrong to cripple a cripple?
Obviously!
What length labret stud would you need to use as an earring?
8mm or 5/16"
What is the length of a pre-cut stud for a 8' wall height?
92-5/8"
Is the longer side in a rectangle always the length?
By convention the longer side is called the length, but it doesn't have to be. Consider a rectangular window: If you were to buy a blind for a window, the length of the blind would correspond to the drop from top to bottom of the window, and the width of the blind would correspond to the distance from side to side. If the window was a short, wide window the width of the blind would be longer than its length!
What is difference between Stud and stud bolt?
stud has all its length threaded and it is used with two nuts, but the bolt has one end closed and the other end is threaded ,it is used with a single nut.
What is a jack rafter or called a cripple?
A Jack rafter is a rafter that has the pitch of the roof cut onto one end with a 54 degree angle this sort of rafter is one of several that fit onto a hip ridge. To cripple a piece of timber means to cut it partway through in order to straighten it if this is done to a wall timber it will need to be splinted to restore the strength of the stud
A window has a length of 45 inches and a diagonal of 53 inches. What is the width of the window?
28 in
When was Cripple Bastards created?
Cripple Bastards was created in 1988.
