0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a sub main distribution board?
A sub main is a distribution board fed from the main distribution board panel normally protected via a CPD.
What does 2deep rule mean?
The "2-deep" rule means that a building should have only the main distribution and the intermediate distribution that feeds the horizontal distribution to the work area.
What is main function of distribution bars?
Distribution bars allow a vehicle to pull more weight without damaging the rear axle or interfering with steering. They function by adding some leverage to both sides of the hitch, which allows for more even distribution of the load's weight.
Does The South Arcot Electricity distribution Co ltd. of Madras exist?
No, it was taken over by the Government of Madras State by an Enactment in 1954 and became part of the Madras State Electricty Board (now Tamil Nadu Electricity Board) circa 1957-59.
Is normal distribution also a probability distribution?
Yes. When we refer to the normal distribution, we are referring to a probability distribution. When we specify the equation of a continuous distribution, such as the normal distribution, we refer to the equation as a probability density function.
What is a sub main distribution board?
A sub main is a distribution board fed from the main distribution board panel normally protected via a CPD.
Can you connect final Distribution board directly to Main Distribution Board without Sub main Distribution Board and why?
yes no problem
What is the difference between Sub Main Distribution Board and distribution board?
main db using mcb sub main db using mccb that is deference
What is the full name for MDB?
Main distribution board
What is MDB and SMDB in electrical?
MDB= Main Distribution Board, it is usually fed from a substation and supplies electricity to a Sub Main Distribution Board ( SMDB ) The SMDB goes on to supply electricity for a panel
What is mean by 7segment distribution board?
A distribution board which has 7 segments , one for Main incomer, three as sub incomer for each phase and three for singlephase outgoing is called a 7 segment DB
What do you call the board where the splices and joints are presented?
distribution board
What is pdb panel?
power distribution board
What is the function of distribution board?
It is a device that carried various sizes of fuse to supply power to different areas of the building respectively.
What is the difference between main switch and distribution board?
The switch turns the supply on and off whilst the distribution board takes the incoming supply and separates it into the various loads - lighting, cooker, shower, sockets, etc. In modern domestic electricity supplies the distribution board usually incorporate a mains switch but in the earlier days of electricitythe switchwould be mounted separately from the 'fuse box' because the materials used were quite bulky in comparison to modern alloys and plastics.
Should wires come in the top of a panel box?
They can come in the top or bottom whichever is the best. <<>> If the distribution panel is a load center (no Main disconnect) the above statement is true. If the distribution panel is a combination panel (main disconnect at top of panel) then the load feeds can only be brought in the two sides and the bottom. A combination panel has an internal barrier to separate the main disconnect from the load side of the distribution board.
What s ELDB panel?
It is an electrical lighting distribution board that is used in India. It is similar to the lighting distribution panel board used in North American homes.
