What is absolute error formula?

Answer 1

Absolute and Relative Error

Absolute and relative error are two types of error with which every experimental scientist should

be familiar. The differences are important.

Absolute Error: Absolute error is the amount of physical error in a measurement, period. Let's

say a meter stick is used to measure a given distance. The error is rather hastily made, but it is

good to ±1mm. This is the absolute error of the measurement. That is,

absolute error = ±1mm (0.001m).

In terms common to Error Propagation

absolute error = Δx

where x is any variable.

Relative Error: Relative error gives an indication of how good a measurement is relative to the

size of the thing being measured. Let's say that two students measure two objects with a meter

stick. One student measures the height of a room and gets a value of 3.215 meters ±1mm

(0.001m). Another student measures the height of a small cylinder and measures 0.075 meters ±1mm (0.001m). Clearly, the overall accuracy of the ceiling height is much better than that of

the 7.5 cm cylinder. The comparative accuracy of these measurements can be determined by looking at their relative errors.

relative error = absolute error

value of thing measured

or in terms common to Error Propagation

relative error = Δx

x

where x is any variable. Now, in our example,

relative errorceiling height = 0.001m

3.125m

•100 = 0.0003%

relativeerrorcylinder height = 0.001m

0.075m

•100 = 0.01%

Clearly, the relative error in the ceiling height is considerably smaller than the relative error in the

cylinder height even though the amount of absolute error is the same in each case.