Vertical engines produce more power than horizontal engines and horizontal engine has less power than vertical engines and horizontal engines are especially designed for better mileage Not sure about mileage but the big difference is vertical shaft goes like this | and the horizontal shaft goes like this ---- . > Lower centre of gravity.
XXXXXXXXX=Horizontal X X X X X X X=Vertical.
A horizontal line.A horizontal line.A horizontal line.A horizontal line.
A horizontal angle is an angle between lines on a horizontal plane.
this is horizontal: ---------------------------- / / this is at an angle: / / /
Adit
Adit
Drive shaft is vertical- like a lawnmower. Cylinder is horizontal.
A horizontal mine shaft is called an adit. en.wikipedia.org/wiki/Adit
An adit is a horizontal access shaft to an underground mine.
Vertical engines produce more power than horizontal engines and horizontal engine has less power than vertical engines and horizontal engines are especially designed for better mileage Not sure about mileage but the big difference is vertical shaft goes like this | and the horizontal shaft goes like this ---- . > Lower centre of gravity.
XXXXXXXXX=Horizontal X X X X X X X=Vertical.
Most likely 3/4" diameter, though it's possible it's 5/8". Although, I have never even once heard of a 3.5 hp mower with a horizontal shaft.
I am afraid not Depending on the size of the shaft on the thing you are putting on it is possible to get a bushing made to increase the size of the shaft. Go to your local machine shop and ask if they can make one.)
6.5 HP
An adit. In North America, the horizontal or sloped entrance to a mine is called a "Portal". Portal more specifically refers to the portion of the shaft visible from the outside of the mine. In some areas, the Portal portion of a horizontal shaft is called the "Drift Mouth" or "Drift Portal" as this shaft leads into a "Drift Mine". With a vertical shaft, that portion would be called a "Collar".
5/8 inch