Hi, It is 16mm Hi, It is 16mm
"16 mm" probably refers to the diameter. The mass of a steel bar depends not only on its diameter, but also on its length.
If the circle inscribes the square, the diameter equals the square's side length. In this case, 16mm.
If the diameter is 16mm, then the radius is diameter/2 = 8mm.
If 16mm is the overall diameter of the cable, yes - If that's the diameter of one core, then no.
16mm
16 mm!
diameter square of the bar. Divided by 162. gives W/1m length
No, they are not the same size. CR2032 is 20mm in diameter while CR1632 is 16mm in diameter.
11-16mm
The lap length for welding a reinforced bar will depend on the size of the bar that is being welded. If the bars are different diameters when lapped, the lap length should be calculated using the lesser diameter.
Minimum length of splice is determined by local building codes, but a good rule of thumb is to make the splice length at least 20 times the bar diameter, but always at least 18" minimum.