0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
A wire rope sling with a strength of 10000 pounds and a total working load of 2000 pounds has a design factor of what?
5
What is the safe working load for a 1 diameter IWRC 6 19 wire rope?
The safe working load can be calculated using the 6 x 19 &. 6 x 36 classification.
What is theweight of 50000 meters of 16 mm wire rope?
It depends on the density of the rope.
What can be sold in meters?
Fabric, Cable, Wire, Rope
What is AWG18 in inches?
AWG18 wire has a diameter of 0.0403 inches.
What will be the breaking strength of wire rope sling if SWL of wire rope sling 8T and factor of safety is 5?
1.6 ton The answer would be 40T, 1.6T is the WLL or SWL of an 8T nominal breaking strength rope.
How do i calculate nominal breaking strength of wire rope?
These are rule of thumb formulas but close to a manufacture's chart. for fiber core wire rope square the diameter times 42 = NBS Example, 1/2" x 1/2" x 42 = 10.5 tons UBS (Ultimate breaking strength) or NBS The formula is the same for IWRC, but use 45 as the multiplier, because of the higher strength in the rope. Example, 1/2" x 1/2" x 45 = 11.25 ton
How do you calculate and find the size of wire rope?
wire rope has many other names such as wire,multi strand wire and flexible wire.to measure it with a diameter convert weigh by pounds per foot [b/f to kilometres per meter multiple that by 1.488 and to convert rope in minium breaking force in tons to kilo newtons multiply by 8.897 1lb =4.448 newtons and to convert rope in minimum breaking force in tons to kilo grams then multiply that by 907.2
SWL for 10mm diameter wire rope?
1.4-ton
How do you calculate wire sizes required for making a Wire Rope?
It is easy for wire rope with construction of 6x19,6x37 and 6x61 because all wires in a strand have the same diameter but for other construction needs math knowledge.
When sheave groove is larger than the diameter of rope what will happen?
A sheave groove, such as the groove in a pulley, allows a rope or wire to pass through unhindered by friction or obstructions. The correct size sheave is required to minimize wear and tear on the rope or wire. When grooves become overly worn or are too large, they may allow excessive movement, which stresses the rope and reduces its life. A groove that is too small will compress the rope, breaking fibers or strands, and reducing the lifespan.
How do you calculate SWL?
TO CALCULATE THE SWL OF LIFTING WIRE ROPE THE FORMULAE CAN BE USED- 8*D2 WHERE 'D' IS THE DIAMETER OF WIRE ROPE IN 'mm' THIS WILL GIVE THE APPROX SWL (SAFE WORKING LOAD CAPACITY)
What is a cable rope?
For ropework a cable is simply a large rope, whether made of metal, hemp, or synthetic material. Wire rope and other rope is usually referred to as cable when it gets larger than 1 inch in diameter.
Is there a difference between wire rope and stranded wire?
Wire rope has finer strands and more of them. Because of this, rope is more flexible and stronger. Rope tends to unroll and stranded wire will stay bent.
What is non galvanized wire rope?
non galvanized means it will rust with moisture. wire rope is another name for stell cables used on elevatores , cranes bridges..ect... - - - - - It's something Home Depot doesn't carry. Galvanized wire rope has been dipped in zinc to keep it from rusting. Non-galvanized rope has to be coated in oil to keep it from rusting. Non-galvanized rope is usually pretty large - 1/2" diameter or larger.
A wire rope sling with a strength of 10000 pounds and a total working load of 2000 pounds has a design factor of what?
5
Conditions of deterioration of wire rope?
When a Crane wire rope deteriorates its called Complete rope core failure.
