Compression ratio is exclusive to each cylinder, though they will all have the same result if they are the same dimensionally ( and they always are)
>
Divide the total engine capacity by the number of cylinders, this gives the capacity or swept volume of each cylinder (bore * stroke)
>
So in a 2.0 (2000 cc) litre 4 cylinder engine, each cylinder has a 2000 / 4
= 500 cc swept volume (bore * stroke)
>
The combustion chamber is the volume remaining at top dead centre (TDC)
>
Compression ratio = volume at BDC (swept volume + volume at TDC) / volume at TDC
The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.
minimum is '0' and maximum cannot be defined
Minimum and maximum requirements: three straight lines meeting pairwise. Minimum and maximum requirements: three straight lines meeting pairwise. Minimum and maximum requirements: three straight lines meeting pairwise. Minimum and maximum requirements: three straight lines meeting pairwise.
minimum
Range = Maximum - Minimum = 32 - 2 = 30.Range = Maximum - Minimum = 32 - 2 = 30.Range = Maximum - Minimum = 32 - 2 = 30.Range = Maximum - Minimum = 32 - 2 = 30.
It is the distance between two points of maximum compression (or minimum compression).
No max is listed, this is from the Chrysler service manual. # Compression should not be less than 689 kPa (100 psi) and not vary more than 25 percent from cylinder to cylinder.
Around 230psi. Minimum is 170psi. I have the same exact car.
The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.
The opposite of minimum is maximum.
Check master cylinder reservoir should be marked minimum and maximum levels
Stihl web page lists minimum as 110 lbs of compression
Maximum:
A parabola's maximum or minimum is its vertex.
Minimum-Maximum was created in 2005-06.
the minimum is 100 PSI. The maximum variation would be 30% between the 4 cylinders.
A maximum or minimum is generally referred to as an extrema.