answersLogoWhite

0


Best Answer

This is impossible to calculate without knowing the surface area of the pool.

User Avatar

Wiki User

โˆ™ 2008-11-10 07:24:57
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: What is the depth of a pool holding 64 cubic feet of water?
Write your answer...
Submit
Related questions

How much water in a swimming pool 18 feet by 30 feet?

What's the depth? This is essential to find cubic feet. Depth x width x length = ? Cubic Feer


A rectangular pool is 20 feet by 30 feet. The depth of the pool is 60 inches but the depth of the water is three fourths of the depth of the pool. What is the volume of water in the pool?

It is 2250 cubic feet.


How many gallons in pool 13 feet diameter times 3 feet depth?

There are about 916.5 gallons of water in a pool that is 13 feet in diameter and 3 feet in depth. This is because it has a volume of about 122.5 cubic feet, and there are about 7.48 gallons of water in one cubic foot.


A cubed shaped whirlpool holds 64 cubic feet of water what is the depth?

78 feet


How many cubic feet of water are needed to fill a swimming pool 24 feet long and 15 feet wide to a depth of 5 feet?

That is 1,800 cubic ft.


How many gallons in a 12x18 pool?

To calculate the gallons you also need the average depth. Then you take lenth X width X average depth = cubic feet of water. cubic feet of water X 7.48 {gallons per cubic foot} = total gallons.


A swimming pool is 60 feet long and 30 feet wide how many cubic feet of water will be needed to fill the pool to a depth of 8 feet?

60x30x8=14400 cubic feet


How many gallons of water in a lagoon 18' x 36' pool?

To calculate the gallons you also need the average depth. Then you take lenth X width X average depth = cubic feet of water. cubic feet of water X 7.48 {gallons per cubic foot} = total gallons.


How do you convert square feet to cubic feet?

In order to convert square feet into cubic feet, you need to know the depth of the area. Formula: Length X Width X Depth = Volume. Cubic Feet also equals Volume in the US system for measurements. As in Squares are concerned, then can be cut into cubic measurements, hence cubic feet. Volume is typically referred to with out of square objects such as circles. Square feet is the overall area of the project, minus any depth you may require. Cubic feet incorporates your depth into your planter beds square feet.


How many cubic yards of concrete are needed to cover 700 sq ft to a depth of 2 feet?

700 sq feet to 2 feet depth = 1400 cubic feet of concrete, which is equal to 51.85185 cubic yards of concrete.


How many cubic feet is 700 feet by 200 feet by a depth of 85 feet?

This is a volume of 11.9 million (11,900,000) cubic feet.


Change square feet to cubic feet?

square feet is length X width, you need depth measurment to get cubic feet.


What is the depth if volume is 540 cubic feet and 10ft long and 9ft wide?

The depth is 6 feet.


How many gallons of water are in a pool 28 feet by 14 feet with an average depth of 5 feet?

In One Cubic Foot There Is 7.4805 Gallons. To Get Cubic Feet Of A Square Or Rectangle Multiply length X width X depth = Cubic Feet 28 Ft. Length X 14 Ft. Width X 5 Ft. Deep = 1960 Cubic Feet 1960 X 7.4805 = 14,661.8 Gallons


How much water fills one square foot?

Technically, none. A square foot is a measure of area whereas it is the volume of water that is required. To convert from area to volume it is necessary to know the depth. A twelfth of a cubic foot will cover an area of one square foot to a depth of 1 inch. A cubic foot will cover it to a depth of 1 foot, 100 cubic feet will cover it to a depth of 100 feet.


How many cubic feet in a building?

You multiply the width x depth x height of the building in feet to determine cubic feet.


Cubic feet to square feet?

Square feet is a measure of area. It is obtained by multiplying the width by the length. Cubic feet is a measure of volume. It is obtained by multiplying the area (width by the length) by the depth (could also be called height). A measure in cubic feet cannot be converted to square feet, but can be used to calculate square feet by dividing it by the depth. A measure in square feet cannot be converted to cubic feet, but can be used to calculate cubic feet by multiplying it by the depth.


How would you find the mass of water in a swimming pool?

You would measure the swimming pools length, width and depth to determine how many cubic feet of water is in the swimming pool. Length x Width x depth = cubic feet. Then measure the mass of 1 cubic foot of water by building a box 1'x1'x1'. Once you know the mass of 1 cubic foot of water - you'll know the mass of the water in the swimming pool.


How many cubic feet of water will the pool hold if the entire pool has a depth of 5 feet?

5 times the surface area of the pool - in square feet.


How do you determine how much water is in your pool?

If you mean you want to know the volume of water in your pool, you would multiply the length times the width times the depth (in feet). The answer will be in cubic feet, but if you want the answer in gallons, multiply the number of cubic feet by 7.481. If the depth varies (eg., 3 feet at the shallow end to 6 feet at the deep end), you can use an average to get a rough estimate.


How many cubic feet of water in 16 x 32 feet swimming pool?

Not possible to say without any information about the depth.


How many cubic yards of soil to a depth of 1 inch are needed to cover 2000 square feet?

Here's the formula: 27 cubic feet = 1 cubic yard. 1 cubic yard will cover 324 square feet at a depth of 1 inch. 2000 square feet divided by 324 square feet = 6.2 yards (rounded). Another approach: 7 cubic yard X 324 square feet = 2268 square feet of coverage at a depth of 1 inch.


What does it mean when a refrigerator is 28 cubic feet?

Its internal measurements (width * depth * height) give its volume in cubic feet


How many cubic feet in square feet of stone?

Square feet is length x width and is given in square feet. Cubic feet is length x width x depth and is given in cubic feet.


How big is .5 cubic feet of space?

It is exactly 0.5 cubic feet big because cubic feet is a measure of volume.

Study guides

๐Ÿ““
Create a Study Guide