AWG18 wire has a diameter of 0.0403 inches.
0.0031
If the diameter doubles (x2), the cross-sectional area quadruples (x4).
For wire gauge, 1.25 mm diameter wire is closest to 16 gauge (AWG). See related link.
Here's the formula for converting American (or Brown and Sharpe) wire gauge to millimeters:dn = 0.005 mm x 25.4 x 92 36-n/39With this formula, you can convert a wire gauge size to the diameter of the wire in millimeters. The dn is the diameter of the wire in millimeters, as you might have guessed, and the n in the exponent is the gauge of the wire you wish to find the diameter of.Wikipedia has a fine article on this. They have the formula for converting wire gauge to diameter as well as one for calculating cross-sectional area. They also explain where the formula comes from, if you're interested. The formula for converting from diameter to the wire gauge, the inverse of this formula, is also listed, as is a chart. A link is provided for you convenience. Another link is also provided to an online calculator that will let you just put in a diameter or a wire gauge and will do all the work for you. (Note that this calculator works in inches and not millimeters, so you'll have to make a conversion.)Improved Answer By Sandip Vikma :"Above original formula is difficult to calculate. So, you may use bellow derived formula to convert Gauge into MM".dn = 0.127 x 92 [0.9230769-0.025641026n]Where,dn = Thickness in MM.n = Thickness in Gauge.
No bell wire is not meant to be 230V.
16-gauge wire has a diameter of 0.05082 inches.
If the length of the wire increases its diameter decreases
large diameter wire simply because it will move easier Technically they would have the same resistance, but the larger diameter wire would allow more current to flow as it would have more room to move.
There isn't a specific diameter. The thicker the wire the more current it can convey. This diameter will be part of your calculations for your circuit.
No, a smaller diameter wire has a higher resistance. The 0.01 mm wire will have 1/100 the cross-sectional area of the 0.1 mm diameter wire, therefore the resistance will be 100 times as high.
The larger the wire gauge, the smaller the diameter. 12 gauge is bigger than 14 gauge.
gauge
By the diameter of the wire.
aprox 10% of the diameter of the wire
Jellyfish range from about one millimeter in bell height and diameter to nearly two meters in bell height and diameter; the tentacles and mouth parts usually extend beyond this bell dimension.
22 AWG has a diameter of 0.0253 inch.