Want this question answered?
depends on size....
In electrical terms it represents Rigid Steel Conduit. It is also known as Rigid Metal Conduit (RMC).This is not to be confused with Electrical Metallic Tubing (EMT) also known in the trade as thin wall conduit.
2 inch Rigid or IMC conduit if it's on a structure. 2 inch schedule 80 PVC conduit if it's on a wood pole.
A trade size hole for a 2-1/2" EMT conduit connector, the hole needs to be 2-7/8" in diameter. A 3" rigid conduit can also use this size hole without the lock nuts falling into the hole.
It depends upon the construction of the building as to what type of electrical system is used. If the building is of a wood frame then ordinary home wiring system can be used. If the use of steel studs is involved then BX has to be used for the internal wiring. Where the cables come out of the walls to equipment, they have to be mechanically protected with conduit or flexible conduit. If the building is block or brick and the wiring system has to be installed on the surface, the system has to be conduit. If the installation is not engineered and no stipulation as to what type of conduit system has to be used, then go with EMT. EMT systems are labour and material wise cheaper than a threaded rigid system. To make the job look professional you need to hire someone that is good at bending EMT conduit. Ask to see other jobs that the contractor has done before letting out the contract.
depends on size....
In electrical terms it represents Rigid Steel Conduit. It is also known as Rigid Metal Conduit (RMC).This is not to be confused with Electrical Metallic Tubing (EMT) also known in the trade as thin wall conduit.
4 inch rigid conduit
One problem of using rigid conduit in a residency when it is not needed is that project will very quickly over run the budget of the project. Labour will be at least 5 times more expensive to install rigid over NMD90 cable.Another problem will be the tight bends required in home wiring as compared to the radius bends that rigid conduit requires.
The metal which does not undergo any kind of deformation under the action of external forces on it is a rigid metal. It will not change in size, shape and position in response to external actions.
Conduits shall be supported at intervals not exceeding 3000mm.
There will be at lease three and on some conduits additional information. There will be the manufacture's name, type of material the conduit is manufactured from and the diameter size of the conduit. For example Scepter PVC 100 mm (for American customers 4") conduit.
2 inch Rigid or IMC conduit if it's on a structure. 2 inch schedule 80 PVC conduit if it's on a wood pole.
An electrical conduit is a tube used to protect and route electrical wiring in a building or nonbuilding structure. Electrical conduit may be made of metal, plastic, fiber, or fired clay. Most conduit is rigid, but flexible conduit is used for some purposes.
4 inch rigid conduit
A trade size hole for a 2-1/2" EMT conduit connector, the hole needs to be 2-7/8" in diameter. A 3" rigid conduit can also use this size hole without the lock nuts falling into the hole.
2 inch