The basic definition of a Cubic Mile or 13mile is 1 mile wide by 1 mile long by 1 mile tall. So 1 mile long
No it 1mile times 1mile times 1mile
1 mile= 1 mile 5,280 feet= 1 mile
Yes but also 2 miles by half a mile 10 miles by 1/10th a mile etc
1 mile * 1 mile = 5280*5280 sq ft = 27878400 sq ft
on mile down the road
how long does it take to get down 1 mile to the ocean floor
You will travel 5,280ft, which is 1 mile.
High and low pressure systems. 1 mile south could be a low pressure system which would have a different temperature than a mile north with a high pressure system. Thats just one variable though.
about 2350 psi or 16.2 MPa
The pressure created by the considerable weight of the 1 mile of crust creates heat. Even small movements create a huge amount of heat due to friction as particles "scrape" past each other with such pressure.
The Pressure (in the air) at the top surface of the ocean, at "Sea Level", is approx. 14.7 pounds of force on every square inch of area (called "psi"). This 14.7psi is also called 1 standard atmosphere (what our bodies are normally used to experiencing). We do not normally "feel" this pressure since the inside of our body is also experiencing this same 14.7 psi. Now as you go deeper and deeper under water the additional pressure is equal to the weight of the water above you. For every 407 inches of water (34 feet) you move down in the water the pressure goes up an additional 14.7 psi or 1 additional atmosphere. Now 1 mile = 5280 Feet = 63,360 Inches and 1 cubic inch of water (1 inch wide X 1 inch long X 1 inch deep) weighs 0.036 pounds (symbol is "lbs") so a 1 inch wide X 1 inch long X 1 mile deep "slice of water weighs 2,280 pounds (lbs) or over a ton. SHORT ANSWER the pressure 1 mile down is over 2,280 pounds of force on every square inch of area (2,280 psi) or 155 atmospheres(155 times normal sea level pressure). This is like having a small car (1 ton) pressing down on every 1 inch wide by 1 inch long bit of surface(in the case of the BP spill, this is why the robots are used in place of humans, because the pressure is way to high for the human body).
1 mile 1 mile = 1.6 kilometer 1 kilometer = 0.62 mile
The basic definition of a Cubic Mile or 13mile is 1 mile wide by 1 mile long by 1 mile tall. So 1 mile long
No it 1mile times 1mile times 1mile
1 mile= 1 mile 5,280 feet= 1 mile
1 mile = 1.609344 km 1 km = 0.621371 mile 1 mile is 60.9% longer than 1 km. 1 km is 37.9% shorter than 1 mile. (All figures are rounded.)