The basic definition of a Cubic Mile or 13mile is 1 mile wide by 1 mile long by 1 mile tall. So 1 mile long
No it 1mile times 1mile times 1mile
1 mile= 1 mile 5,280 feet= 1 mile
Yes but also 2 miles by half a mile 10 miles by 1/10th a mile etc
1 mile * 1 mile = 5280*5280 sq ft = 27878400 sq ft
how long does it take to get down 1 mile to the ocean floor
The pressure under 1 mile of the Earth's crust is approximately 2,300 pounds per square inch (psi). This pressure increases with depth due to the weight of the overlying rock and material.
You will travel 5,280ft, which is 1 mile.
Pressure 1 mile below sea level is approximately 1,525 pounds per square inch (psi). This is due to the weight of the water column above exerting pressure on the depth below.
High and low pressure systems. 1 mile south could be a low pressure system which would have a different temperature than a mile north with a high pressure system. Thats just one variable though.
The pressure 1 mile under the Atlantic Ocean is approximately 2,300 pounds per square inch (psi). This pressure increases as you descend further into the ocean due to the weight of the water above.
The Pressure (in the air) at the top surface of the ocean, at "Sea Level", is approx. 14.7 pounds of force on every square inch of area (called "psi"). This 14.7psi is also called 1 standard atmosphere (what our bodies are normally used to experiencing). We do not normally "feel" this pressure since the inside of our body is also experiencing this same 14.7 psi. Now as you go deeper and deeper under water the additional pressure is equal to the weight of the water above you. For every 407 inches of water (34 feet) you move down in the water the pressure goes up an additional 14.7 psi or 1 additional atmosphere. Now 1 mile = 5280 Feet = 63,360 Inches and 1 cubic inch of water (1 inch wide X 1 inch long X 1 inch deep) weighs 0.036 pounds (symbol is "lbs") so a 1 inch wide X 1 inch long X 1 mile deep "slice of water weighs 2,280 pounds (lbs) or over a ton. SHORT ANSWER the pressure 1 mile down is over 2,280 pounds of force on every square inch of area (2,280 psi) or 155 atmospheres(155 times normal sea level pressure). This is like having a small car (1 ton) pressing down on every 1 inch wide by 1 inch long bit of surface(in the case of the BP spill, this is why the robots are used in place of humans, because the pressure is way to high for the human body).
1 mile is equal to 1 mile.
One example of something that is 1 mile is the distance covered by traveling for 1,760 yards or 5,280 feet. Another example is a standard running track, which typically measures 1/4 mile per lap. Additionally, a mile is equivalent to 1.60934 kilometers in the metric system.
At 1 mile below sea level, the pressure in pounds per square inch (psi) would be approximately 2,227 psi. This represents the increase in pressure due to the weight of the water column above at that depth.
1 mile 1 mile = 1.6 kilometer 1 kilometer = 0.62 mile
The basic definition of a Cubic Mile or 13mile is 1 mile wide by 1 mile long by 1 mile tall. So 1 mile long