If the pieces came from a solid object of uniform density then the ratio is the same for each piece. But if not, the ratios need to be calculated separately.
If a piece of wire was cut into 2 pieces in the ratio 7:8 and the shorter piece was 14cm, then the length of the longer piece will 16cm.
If you mean a ratio of 5 to 7 then the two pieces are 15 inches and 21 inches
greater surface area to volume ratio greater the rate of dissolution it will dissolve faster if broken into smaller pieces hence smaller = faster
it is the ratio of volume of unit weight of intact material to the volume of broken material
81
Bulk deformation is the processing of work pieces that have relatively small surface area to volume ratio (or surface area to thickness). In bulk deformation processing ,the thickness or cross section of work piece changes.
The ratio between mass and volume is density.
The ratio of clearance volume and the volume of the compressor
DensityThe ratio of mass to volume is density.
wde
to obtain the ratio of surface area to volume, divide the surface area by the volume.
Density is the ratio of mass to volume.