Best Answer

Volume = pi*122*24 = 10857.344 cubic inches to 3 d.p.

Q: What is volume of a cylinder 24 inches diameter and 24 inches depth?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

The volume in liters of a cylinder with a diameter of 2000mm and a depth of 100mm is: 314 liters.

Volume of a cylinder is: Area of the circle x depth Area of a circle is: (pi * diameter^2)/4 where diameter is 2 ft Depth is: 1 ft Therefore, the volume of the cylinder is 3.14ft^2 * 1 ft = 3.14 cubic feet of water

V = volume of a cylinder = Pi*Diameter*depth 144 square inches = 1 square foot volume of each hole: Pi*10*4 ~= 125.7 square inches / 144 square inches/square foot = 0.8727 square feet We have 30 such holes so total volume = 30*0.8727 = 26.18 square feet.

V = volume of a cylinder = Pi*Diameter*depth 144 square inches = 1 square foot volume of each hole: Pi*10*5 ~= 157.1 square inches / 144 square inches/square foot = 1.091 square feet We have 30 such holes so total volume = 30*1.091 = 32.73 square feet.

The answer will depend on whether the depth is in feet or inches or some other units.

Related questions

The volume in liters of a cylinder with a diameter of 2000mm and a depth of 100mm is: 314 liters.

1.15 gallons of water.

Volume of a cylinder is: Area of the circle x depth Area of a circle is: (pi * diameter^2)/4 where diameter is 2 ft Depth is: 1 ft Therefore, the volume of the cylinder is 3.14ft^2 * 1 ft = 3.14 cubic feet of water

V = volume of a cylinder = Pi*Diameter*depth 144 square inches = 1 square foot volume of each hole: Pi*10*4 ~= 125.7 square inches / 144 square inches/square foot = 0.8727 square feet We have 30 such holes so total volume = 30*0.8727 = 26.18 square feet.

V = volume of a cylinder = Pi*Diameter*depth 144 square inches = 1 square foot volume of each hole: Pi*10*5 ~= 157.1 square inches / 144 square inches/square foot = 1.091 square feet We have 30 such holes so total volume = 30*1.091 = 32.73 square feet.

This is kind of tricky, but here are the basics: Volume is the surface area of the cylinder multiplied by the depth of the water. Do not mix feet and inches, convert all dimensions to feet or inches, depending on the application. To calculate the surface area, measure the inside diameter of the cylinder, divide the diameter by 2 and then multiply by Pi (3.1416). Multiply the surface area by the depth of the water and use following information for conversion: water is 231 cubic inches per gallon or 7.481 gallons per cubic foot.

H = D sin ( ((2*pi*V.k)/V.t) - pi/2) + D Here: D = Diameter of the cylinder V.k = The known volume of the liquid V.t = The total volume of the cylinder H = The height of the liquid.

The answer will depend on whether the depth is in feet or inches or some other units.

A 4-inch diameter cylinder holds 0.7 gallons per foot of depth.

Multiply the length/depth/height and your product will be in cubic inches. That is the volume.

Volume = (length) x (width) x (depth of liquid)-- Volume, cubic inches = (Length, inches) x (width, inches) x (depth, inches)Gallons = (Volume, cubic inches)/231-- Volume, cubic feet = (Length, feet) x (width, feet) x (depth, feet)Gallons = (Volume, cubic feet) x (7.4805)

13.9 gallons per inch of depth.