0
What else can I help you with?
Why did they select platinum iridium rod for the measurement of meter?
Because platinum is non reactive metal
What is the least count of meter rod in meter?
The least count of a meter rod is typically 1 millimeter (mm), which is equivalent to 0.001 meters. This means the smallest measurement that can be accurately read using a standard meter rod is 0.001 meters. However, some meter rods may have finer divisions, allowing for more precise measurements.
One meter rod is divided into 100 equal parts each division would be equal to what?
1cm
If a one meter rod is divided into 100 equal parts each division would be equal to a?
Centimetre
What is the least count of half meter rod?
The least count of a half meter rod is 0.5 cm. This means that the rod can be measured in increments of 0.5 cm, allowing for precise measurements.
19mm rod 1 meter how many kg?
Weight = Volume times Density To answer this question the density of the rod has to be known, probably in Kg per Cubic Meter ( kg/m3) Volume of rod is Cross-sectional Area times Length Area for Square section rod is 19/1000 times 19/1000 = 0.000361 square meters Length is 1 meter Therefore volume is 0.000361 cubic meters Area for Round rod section is π*D squared / 4 or 22/7 * 19/1000*19/1000 / 4 = 0.000284 square meters. Length is 1 meter therefor Volume is 0.000284 cubic meters Weight is Volume times Density All units have to be compatible!
How long is a measurement called a rod?
A rod, also known as a perch or pole, is a unit of measurement that is equal to 16.5 feet, or 5.029 meters. It has historical significance in land measurement and agriculture. The rod is sometimes used in surveying and is equivalent to 5.5 yards.
What difficulties are faced using a meter rod to measure external diameter of a beaker?
Using a meter rod to measure the external diameter of a beaker can be challenging due to the curvature of the beaker's sides, which can lead to inaccurate readings. Additionally, the rod may not fit comfortably around the beaker, making it difficult to hold it steadily in place while measuring. The need for precise alignment and the potential for parallax error further complicate the measurement process. Lastly, the rigidity of the meter rod may hinder the ability to take measurements on irregularly shaped or tapered beakers.
If a 1 meter rod is divided into 100 equal parts each part would be equal to a?
0.01
Where did the rod originate as a unit of measurement?
The rod originated historically as a unit of measurement in Europe, with varying lengths depending on the region. It was typically around 16.5 feet or 5.029 meters. The rod was commonly used for land measurement purposes before standardized units were established.
How many 3 meter lengths of rod is there in 7800 FEET?
792.5 three-meter lengths.
What if not a rod of 36 inches is any standard of measurement?
Yardstick
