0
What sources of error would account in measurement of the same thing?
Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is absolute error formula?
Absolute and Relative Error Absolute and relative error are two types of error with which every experimental scientist should be familiar. The differences are important. Absolute Error: Absolute error is the amount of physical error in a measurement, period. Let's say a meter stick is used to measure a given distance. The error is rather hastily made, but it is good to ±1mm. This is the absolute error of the measurement. That is, absolute error = ±1mm (0.001m). In terms common to Error Propagation absolute error = Δx where x is any variable. Relative Error: Relative error gives an indication of how good a measurement is relative to the size of the thing being measured. Let's say that two students measure two objects with a meter stick. One student measures the height of a room and gets a value of 3.215 meters ±1mm (0.001m). Another student measures the height of a small cylinder and measures 0.075 meters ±1mm (0.001m). Clearly, the overall accuracy of the ceiling height is much better than that of the 7.5 cm cylinder. The comparative accuracy of these measurements can be determined by looking at their relative errors. relative error = absolute error value of thing measured or in terms common to Error Propagation relative error = Δx x where x is any variable. Now, in our example, relative errorceiling height = 0.001m 3.125m •100 = 0.0003% relativeerrorcylinder height = 0.001m 0.075m •100 = 0.01% Clearly, the relative error in the ceiling height is considerably smaller than the relative error in the cylinder height even though the amount of absolute error is the same in each case.
What is absolute measurement approach?
This question makes no sense. An absolute measurement cannot approach anything as it is just one measurement that measures the exact thing that it is measuring.
Difference between an error and a mistake?
they are the same thing.
How many mins is one mile?
Minutes are a measurement of time. Miles are a measurement of distance. As they are not measuring the same thing one can not be converted into the other!
Is there such thing as a Decilitre?
Yes, but it shouldn't be capitalized. It's not a common unit of measurement.
What sources of error would account for the differences in measurement of the same thing?
You might measure wrong the second time
What source of error would account for differences in measurement of the same thing?
You might measure wrong the second time
Why must many researchers repeat an experiment many different times before the result is conciderd valid?
Repeated measurements of an experiment is one way of improving the result - or at least of improving the reliability of the result. Experimental error is a real thing. The reliability of an answer will go up as the square root of the measurements. Sources of error are assumed to be non-systemic. That is , they are not an inevitable part of the measurement. For example, if your reference masses are in error, then all weighings using that reference mass will be in error. Another method of gaining greater reliability in the result, is to have the measurement made by different experimental methods, and using different experimenters.
What was first thing destroyed in bombing of Darwin?
error error error error error error error error error
Are Debugging and error handling are the same thing?
Debugging and error handling are the same thing. true
What sources of error would account for differences in measurement of the same thing?
It really depends on the type of experiment performed. But in any given experiment, there could be hundreds of variables that, when inadvertently changed, can affect the results. __________________________________________________________________ Laboratory mice are similar but not identical to each other.
What is absolute error formula?
Absolute and Relative Error Absolute and relative error are two types of error with which every experimental scientist should be familiar. The differences are important. Absolute Error: Absolute error is the amount of physical error in a measurement, period. Let's say a meter stick is used to measure a given distance. The error is rather hastily made, but it is good to ±1mm. This is the absolute error of the measurement. That is, absolute error = ±1mm (0.001m). In terms common to Error Propagation absolute error = Δx where x is any variable. Relative Error: Relative error gives an indication of how good a measurement is relative to the size of the thing being measured. Let's say that two students measure two objects with a meter stick. One student measures the height of a room and gets a value of 3.215 meters ±1mm (0.001m). Another student measures the height of a small cylinder and measures 0.075 meters ±1mm (0.001m). Clearly, the overall accuracy of the ceiling height is much better than that of the 7.5 cm cylinder. The comparative accuracy of these measurements can be determined by looking at their relative errors. relative error = absolute error value of thing measured or in terms common to Error Propagation relative error = Δx x where x is any variable. Now, in our example, relative errorceiling height = 0.001m 3.125m •100 = 0.0003% relativeerrorcylinder height = 0.001m 0.075m •100 = 0.01% Clearly, the relative error in the ceiling height is considerably smaller than the relative error in the cylinder height even though the amount of absolute error is the same in each case.
What is the error where 2 different persons are recording the same thing?
Operator error.
What is the sinnermatic error of 93?
No such thing!
Are a watt and a joult equivelent units?
no watt is a measurement of power where as if you meant joule that is a measurement of energy which are not the same thing
What is absolute measurement approach?
This question makes no sense. An absolute measurement cannot approach anything as it is just one measurement that measures the exact thing that it is measuring.
That the measurement of that distance would be accurate?
Is a desirable thing in science.
