0
What else can I help you with?
Vertical height of the ramp will be 10 feet The horizontal base of the ramp will be 15 feet What will be the length of the downward sloping side of the ramp?
18 feet
The vertical height of the ramp will be 10 feet the horizontal base of the ramp will be 15 feet what will be the length of the downward sloping side of the ramp?
The length of the downward sloping side of the ramp would be 18 feet approximately this is pythagarus theorem of the sum of squares. the answer should in fact be the number corresponding to the square root of (10*10+15*15).
Vertical height of the ramp will be 10 feet horizontal base of the ramp will be 15 feet what is the length of the downward sloping side of the ramp?
a2 +b2=c2102 + 152 =c2c=18.03 feet
What is the length of the downward sloping side of the ramp if vertical height is 10 feet and the horizontal base is 15 feet?
Aha! A question for Arturo Pythagoras! Slope = sqrt(100 + 225), = 18 ft and a third of an inch
An inclined plane with one or two sloping sides?
An inclined plane with one sloping side is called a ramp, used to move objects up or down with less force. An inclined plane with two sloping sides is called a wedge, used for splitting objects or holding them in place.
What is the MA of a wedge?
The mechanical advantage (MA) of a wedge is calculated by dividing the length of the sloping side of the wedge by its thickness. MA = Length of sloping side / Thickness. This ratio represents how much the force is multiplied when using a wedge to exert a force.
Inclined plane with one or two sloping sides?
An inclined plane with one sloping side is called a ramp, which is used to help move objects from a lower to a higher level with less force. An inclined plane with two sloping sides is called a wedge, which is used to separate or lift objects by applying a force to split them apart.
How do you calculate LAP length of steel reinforcement bar?
one trapozoidal section of 0.5 sloping distance is one side and 0.5 is the another side and 1.0 meter is the horizontal base . what will be the cutting length for it.
What is the slipface of a dune?
The slipface of a dune is the steeply sloping side of the dune that faces away from the prevailing wind direction. It forms as sand grains are blown up the windward side and then deposited on the leeward side, creating a steep angle due to gravity pulling the sand grains downward.
How do you find SUV side door dog ramps?
A dog ramp will work similar on a side door as it works on the backside of the SUV with the back door open. Once you select the proper size dog ramp based on the length required and the weight of the dog, you should be good to go.
How is a wedge related to inclined plane?
They both have a sloping side. A wedge has 2 sloping sides, but an inclined plane has only1.
What are volcanoes with sloping side usually made from?
they are made from no.2
