Want this question answered?
This is the formula. Area = .7854 x bore^2 A = .7854 x 30.25 (5.5^2) A= 23.75 sq.in Volume = Area x stroke 23.75 x 5.5 = 130.625 cubic inches. *This is just one piston. If engine was a nine cylinder then 130.625 x 9 = 1175.625*
The cylinder is where your piston runs, so in easy terms its just your piston housing. So a 4 cylinder engine simply means it has 4 pistons and so on.
It is a 3liter dual overhead cam 6 piston/cylinder engine with 2 valves per cylinder
Volume of a cylinder = pi*r2*h where r is the radius and h the height. = pi*2.52*5 = 98.2 cubic inches.
Volume = pi*r2*h = 8*5 = 40 cubic inches
formula for displacement: A=(pi)r^2 A is Area Pi is 3.14 and R is the radius of the cylinder, this is the piston in Square inches. then multiply that by the distance the piston travels, that is the displacement of one cylinder to find total engine displacement multiply that by how many pistons are in the engine to get total engine displacement
The piston cylinder bore, times the cylinder stroke, times the number of cylinders gives you the specific displacement for a particular engine.
9.4247 cubic inches
500 (cubic inches) = 8.193532 liters
5.2L if you meant 320 CUBIC inches (in3)
7.0 liters. 1 liter equals about 60.02 cubic inches
The cubic inches of piston displacement are generally considered to be one of the more reliable measures of real power of an engine.
8L Engine
The bore refers to the Inside diameter of the cylinder. The Piston will be nearly the same diameter, with the piston rings making up the difference. Convert the bore to area by multiplying by pi and dividing by four, and multiply by the stroke and the number of cylinders and you have the volume displacement of the engine.
Displacement
This is the formula. Area = .7854 x bore^2 A = .7854 x 30.25 (5.5^2) A= 23.75 sq.in Volume = Area x stroke 23.75 x 5.5 = 130.625 cubic inches. *This is just one piston. If engine was a nine cylinder then 130.625 x 9 = 1175.625*
The Stirling engine was invented by Reverend Dr. Robert Stirling and patented by him in 1816.It is an engine that gets it's power from the movement of heat energy from a hot place to a cold place. It consists of two cylinders, the first one is called the displacement cylinder and the second one is the power cylinder.The displacement cylinder has two sections, a hot section and a cold section, the piston in the displacement cylinder is a loose fit so that air or gas can pass by when it is moving, the purpose of this piston is to move the air or gas from the hot section to the cold section and back to the hot section hence "displacing it".Second is the power cylinder containing a double acting piston that is connected to a crankshaft fitted with a fly wheel.When the displacing piston moves to the cold part of the cylinder, the largest volume of air or gas is in the hot part of the displacement cylinder, where it will heat up and expand to a higher volume and push the power piston outwards, when the displacement piston moves to the hot side of the cylinder the air or gas moves over to the cold side of the cylinder, where it will cool down and shrink to a smaller volume and form a vacuum that sucks the power piston in the opposite direction.