White is neutral and goes on silver colored screw, black is hot and goes on gold colored screw. The bare or green wire is ground and goes on the green screw.
Black & Red are hot, and White is neutral. If it has no place to connect neutral connect neutral to ground.
You don't, you need a three wire to correctly make the connection.
No, the wide prong is neutral it is the white wire. The narrow prong is hot it is the black wire. The round prong (in a 3 wire plug) is safety ground it is the green wire.
Do not use this type of cable to feed a 120/240V dryer outlet. The outlet is ungrounded, and the third conductor is neutral not ground. Your ground wire must be sheathed by code. You cannot use the bare neutral conductor as ground. Diagram Did Not Come Through. You Have a 3 Prong Connector. The Prong On The Bottom By Its Self Connect The Bare Wire. That Is What Was # 3 Connect The Others To The Two Prongs Next To Each Other. Hope This Makes Some Sense (1) (2) (3) Connect White To (1), Connect Black To (2) Bare (3) Good Luck
If you are in north America, black and red go to the main prongs and white to the ground (round prong) . Black and red can be on either main prong.
Black & Red are hot, and White is neutral. If it has no place to connect neutral connect neutral to ground.
You don't, you need a three wire to correctly make the connection.
No, the wide prong is neutral it is the white wire. The narrow prong is hot it is the black wire. The round prong (in a 3 wire plug) is safety ground it is the green wire.
Do not use this type of cable to feed a 120/240V dryer outlet. The outlet is ungrounded, and the third conductor is neutral not ground. Your ground wire must be sheathed by code. You cannot use the bare neutral conductor as ground. Diagram Did Not Come Through. You Have a 3 Prong Connector. The Prong On The Bottom By Its Self Connect The Bare Wire. That Is What Was # 3 Connect The Others To The Two Prongs Next To Each Other. Hope This Makes Some Sense (1) (2) (3) Connect White To (1), Connect Black To (2) Bare (3) Good Luck
The green wire is for ground. You can attach that to any metal part of the frame. The red is the active and coincides with the lefthand prong into the plug and the black in this case should be the Neutral and ciocides with the right prong into the plug as seen standing behind the plug.
If you are in north America, black and red go to the main prongs and white to the ground (round prong) . Black and red can be on either main prong.
Black, white, and copper.
twist mountain
Green is ground and white is neutral.
it is Outlet that will work with 2 hot wire one black and white.
Twist Mountain is to the east of Route 7 and to the south of Icirrus City.
Basically, Your ground prong is essential to protecting you from being in contact with an "unsuspecting Live current flow." It eliminates YOU as the primary grounding to whatever your plug is supplying power to, and sends any current flow, manually drawn (like touching it), into the ground prong. Your feet touching the earth acts as a "grounding" process, but with a ground prong; itself alone acts as the ground for you, allowing you to escape the ability to receive external power.