The larger the AWG number the smaller the wire. 10 AWG wire can carry more current than 12 AWG wire.
The wire sizes of 24 and 26 are the smallest that are used in the electrical.
See related links below
The larger the wire gauge, the smaller the diameter. 12 gauge is bigger than 14 gauge.
I think you mean either what is the correct size or minimum wire size needed when a branch circuit is protected by a 20 A breaker. The size is 12 American Wire gauge (AWG). 14 AWG is used for 15 A circuit and 10 AWG for a 30 A breaker. The lower the gauge the larger the cross-section of the wire.
12 awg is larger.
AWG stands for American Wire Gauge. It is a standardized wire gauging system for the diameters of round, solid, electrically conducting wire.
6 AWG wire
14 AWG
30 amp wired with AWG # 10 wire.
NEC 310.16 conductor ampacities NEC 240.4(D) For residential installations the smallest wire to be used is 14 AWG (15 amps rating) and for commercial installations the smallest wire to be used is 12 AWG (20 amp rating)
The larger the wire gauge, the smaller the diameter. 12 gauge is bigger than 14 gauge.
not unless the wire is exceptionally small, if if is 12 AWG or even 14 AWG you will be ok unless you are using it for a transmission line (unlikely) The smallest wire you can use safely is a 21 AWG wire but that's not a wire used in the walls
The one with the smallest thickness (highest AWG number) and longest length has.
I think you mean either what is the correct size or minimum wire size needed when a branch circuit is protected by a 20 A breaker. The size is 12 American Wire gauge (AWG). 14 AWG is used for 15 A circuit and 10 AWG for a 30 A breaker. The lower the gauge the larger the cross-section of the wire.
AWG # 14 is the smallest wire you can install in a home and it can only be used in living areas. It will carry 15 amps.
American Wire Guage. The smaller the number the larger the wire. As in an AWG 14/2 wire is much smaller than an AWG 10/2 wire.
12 awg is larger.
AWG stands for American Wire Gauge. It is a standardized wire gauging system for the diameters of round, solid, electrically conducting wire.
3/0 awg wire