0
LETTER OF INTRODUCTION
:: THE COMPANY::
M/s Stantec HVAC consultants is Ahmedabad based HVAC Consultancy & MEP consultancy firm. With the experience of more than 24 years We at Stantec HVAC Consultants bind to give Smart optimum solutions to our clientele.
We specialize in heating, ventilation and air-conditioning of buildings and engineering works including office buildings, shopping centers, banks, hotels, residences, computer rooms, clean rooms, laboratories, hospitals and clinics, educational facilities, nuclear power stations, factories and warehouses, Electrical Panel Room.
:: THE PEOPLE::
M/s. Stantec HVAC consultants is Founded by Mr. Tejas Shah i, who is an experienced Mechanical Engineer with PDRA. Mr. Shah has acquired extensive experience in India. He is associated with Air Conditioning & Refrigeration field for over 24 years.
Perform the engineering services through own (in-house) resources.
Omit the consulting engineering services (with no in-house capability) and approach the contracting/supplier industry directly for turnkey proposals, which includes design, supply, installation and commissioning.
The second option (direct industry approach) may look economical on the face of it, but poses several disadvantages that have frequently resulted in far higher cost than the additional cost for a consulting engineering service. These disadvantages include typically:
Being commercially independent from any contractor or supplier, the consulting engineer is in an ideal position to evaluate alternative system concepts during the design stages of a project. These investigations may save the client multiples of the consultant's cost in capital and running cost of plant.
The contractor's design cost is built into the tender prices and would be the same or more than the design fees of a consultant. The contractor will also build into the tender price the cost of design liability insurance to cover design mistakes or poor design. Because these costs are normally hidden, the contracting organisation has no way of knowing what the design cost is. On the other hand, a consulting engineer's design fees are clearly stipulated and agreed and can be compared to internationally accepted norms.
When only one contractor/supplier is approached, there is usually no way of evaluating the competitiveness of his price, unless the scope is standardized, or can be compared to similar scope of works recently procured. Consulting engineers normally are able to negotiate a competitive price from a single contractor/supplier by using schedules of quantities and applying known industry rates.
When more than one contractor/supplier is approached it is frequently very difficult to compare the technical quality and scope of tender offers and the lowest price may well be based on inferior scope and quality compared to other tender offers. Also, without in-house capability the contracting organisation will find it difficult to evaluate the quality of works/equipment offered. Consulting engineers provide technical specifications and all tenders are based on the same scope and quality of works.
Some contractors/suppliers offer only part of the scope (with resultant reduced price) and then offer the remaining scope during the contract at a high rate or price.
Consulting engineers represent the contracting organisation (client) during the construction stage of a project and verify on the client's behalf whether the installation complies with specified requirements.
Evaluation of existing HVAC and ventilation systems including:
Compliance to accepted ventilation practices and legislative regulations
Evaluation of equipment condition
System effectiveness and suitability
Energy audits
Evaluation of existing maintenance service contracts adequacy
Technical audits of existing maintenance service contractors
Calculation of building thermal loads including:
Calculation of cooling and heating loads for identified thermal zones
Recommended division of building into thermal zones
Tender support including:
Assistance with preparation of tender enquiry documents
Evaluation of tender offers and submission of a recommendation report
Construction stage support including:
Factory inspections of HVAC equipment
Site inspections of HVAC equipment
Supply of partial HVAC consulting services (design only) including:
Preliminary design of HVAC systems including building thermal load calculations, selection of system concepts and establishment of building and electrical interfaces
Design of HVAC systems up to preparation of technical specifications, tender documents, and evaluation of tender proposals (design and tender stage)
Supply of full HVAC consulting services including:
Report stage
Preliminary design stage
Design and tender stage
Administration and coordination of the HVAC works during the construction stage
Maintenance support services including:
Evaluation of existing maintenance service contracts adequacy
Technical audits of existing maintenance service contractors
Preparation of new maintenance contracts and tender documentation
STANTEC HVAC CONSULTANT
103 Aagam Complex
Nr. Vasna tel. Exchange
Vasna
Ahmedabad - 380 007
India
Tel Fax: - 91 79 26631673
e-mail :- stantec.con@gmail.com
Mobile :- 9825024651
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you pronounce BH sound?
It varies greatly, depending on what language you are talking about. In English, BH is pronounced like B.
12 bh stands for what?
Braxton Hicks
How do you draw a triangle with an area of 16 square units?
A = bh/2 2A = bh 2(16) = bh 32 = bh I would like to use integers, so the possibilities for the base and height are 1 and 32, 2 and 16, 4 and 8 units, or vice verse. Always, it's your choice how to use them in order to draw different kind of triangles, such as right, scalene, or obtuse triangles.
What is the forumla for the area of a triangle?
1/2(bh)
Is A equals bh the formula for the area of a parellogram?
Yes
Why bh curve is curve?
i believe it's called 'curve' because of the shape, it's curved ...
When was BH Air created?
BH Air was created in 2001.
What is a bh curve?
A graph showing the relation between the magnetic flux density B and the magnetizing force H , for a magnetic material.
Why do you have to divide 2 when you are finding the area of a triangle?
Picture a square. now make a line connecting the two diagonal points. If bh is the volume of the rectangle, then we only have half a rectangle for each right triangle giving 1/2 *bh or bh/2. For any other traingle put the base parallel to the ground. Make a perpendicular line to the ground then you have two parts of a triangle divided at a vertex. Each of the these parts has a right angle. Make a second triangle of the same size and if you turn it into the two triangle fromt he first triangle and cut it apart, you can manipulate it to make a rectangle. The two triangles are a rectangle which is bh. divide by two to get one triangle so 1/2*bh or bh/2
When was BH Telecom created?
BH Telecom was created in 1992.
When was BH Shopping created?
BH Shopping was created in 1979.
Where is the company BH Fitness based?
Beistegui Hermanos, S.A. (BH Fitness) is based in Vitoria-Gasteiz, Spain. BH Fitness of Australia and BH Home Fitness are also part of the same company.
Is Nokia bh 503 is better than Nokia bh 504?
No. The bh-504 is better than the bh-503. The differences are in the isolation and volume which are both much better on the bh-504. For more details visit this link, the reviewer had both bh-503 and 504. Hence being able to give a full comparision of the two, howardforums.com/showthread.php/1573004-Nokia-Bluetooth-Stereo-Headset-BH-504-review
When was BH Dani created?
BH Dani was created on 1992-09-03.
How do find the area of a parallelogram?
Area= base*height A=bh A hole= but+hole A=bh
Where can you buy a service manual for jsw BH80E excavator?
I have a lead on service manual for the JSW BH 80, do you know the difference between the BH 80 and the BH 80e? tom@treeark.com
How do you get the area of a parallelagram?
A = bh, where b is the length of the base (which can be any side of the parallelogram, and h is the length of the height (a perpendicular line drawn from one of the vertex to the base).
