In the North American market, solid core is used for home wiring where flexibility is not a problem with installation. Conduit systems use stranded wire because of its flexibility when being pulled into a conduit system that has multiple bends between pull boxes.
2 copper
#6 wire is good for 65 Amps as long as it is type THHN.
A 3 phase system needs only to use 3 or 4 conductors, as against 6 conductors if it were 3, single phase conductors The amount of copper used in a 3 phase is much less than what would be needed in a single phase system carrying the same current, this reduction in copper allows for weight reduction and cost savings. The power losses in a 3 phase system are much less than in a single phase system.
AWG #3 copper.
Code test question.30 amps maximum.
A given crosssection or diameter of the conductor can be obtained by a single strand wire or with many smaller diameter wires put together. For example a 4 sqmm wire can be one solid wire of 4sqmm or can comprise many smaller diameter wires twined together. A solid wire is more rigid whereas multistrand wire is flexible. A solid wire may not need a terminating lug, whereas a multistrand wire needs a terminal lug for termination / connection to a terminal block
A given crosssection or diameter of the conductor can be obtained by a single strand wire or with many smaller diameter wires put together. For example a 4 sqmm wire can be one solid wire of 4sqmm or can comprise many smaller diameter wires twined together. A solid wire is more rigid whereas multistrand wire is flexible. A solid wire may not need a terminating lug, whereas a multistrand wire needs a terminal lug for termination / connection to a terminal block
Francis C. Liu has written: 'Kink formation and rotational response of single and multistrand electromechanical cables' -- subject(s): Ocean engineering
Copper is a single element.
single displacement i think
Copper is an element. You can have a single atom or many atoms and it's still copper.
Yes. The magnesium metal replaces the copper in the copper sulfate. This is a single replacement or single displacement reaction.
yes
One, Copper Sulphate is a single molecule.
No. Copper is a single element.
copper
Copper is a metal element. There are 29 electrons in a single atom.