0
Type your answer here... so the end result is a 8' (eight foot) ceiling height, taking consideration for flooring and ceiling material.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What are the dimensions of a 2 x 4 stud?
1 and a half inches by 3 and a half inches. Note that an "8 foot 2x4" is 8x12" = 96" long, but a "2x4 stud" is 92 5/8" long to allow for bottom and top plates to make wall framing go quicker.
Can you add a 2x4 by a 2x4 matrix?
Yes.
What is the answer for 2x4?
the answer is 8;)
What is 2x4 plus 8x3 plus 18x?
(2x4) + (8x3) + 18x 8 + 24 + 18x 32 + 18x
How do you replace broken stud on 95 f 150 4x4?
Are you asking about a wheel stud or exhaust stud, please clarify
What is the weight of a 2x4 wood stud?
a normal 2X4 weights between 8 to 10 pounds
What is the weight of a pine 2x4 board?
A 2X4 would be a stud, not a board. Weight depends on the length and species, if it is pressure treated or not. 8ft. hem-fir 2X4 is about 8 pounds or so.
How many 2x4's will you need to build a wall 16ft long and 9ft high?
You will need at least 13-9' 2x4's, on 16" centers, and 2-16' 2x4's for plates. (Deduct plate thickness from stud length)
Why are some 2x4's green?
The color identifies them as "stud grade" pine.
What are the dimensions of a 2 x 4 stud?
1 and a half inches by 3 and a half inches. Note that an "8 foot 2x4" is 8x12" = 96" long, but a "2x4 stud" is 92 5/8" long to allow for bottom and top plates to make wall framing go quicker.
What is the dimension of a 2x4 metal stud?
1 1/2 x 3 1/2
What hole does a wire have to go in when installing a single gang box on a 2X4 stud wall?
Install in the most convenient "hole" (knockout) to the wires that are being run.
How can you find the wall stud without a stud finder?
Answer By putting your ear to the wall : A wall is a collection of studs (usually sized 2x4 or 2x6) equally spaced (usually 16 in. or 24 in. on center) and sandwiched between top and bottom plates. : If you start from the corner, you can measure 16" or 24" and hope that you find a stud. You can hit the wall, and where it sounds more hallow, no stud exists where the sound is higher, there is a stud. But if you can't tell a difference, then measuring could be your only bet.
What is benefit of 2x6 stud over 2x4 stud?
Higher strength. If you are framing over 12' you will need to double the 2 x 4s or go to a 2 x 6 stud. Sometimes 2 x 6s are used to make the cavity larger to allow pipes to be concealed within the wall. Sometimes they are used to bump the insulation value from a R13 to a R19.
Can you build a return air plenum with 2x4 material?
Yes, as long as it is in a wall and your return will fit in a 14 1/2' wide opening. If you have to cut a stud you will need to have a header and cripples.
How many nails need to hold a 2x4 stud to the plate of a wall that is 8' high?
Two on the top plate and two on the bottom plate. Space them about 3/4" fron the edges.
Where is the Sherman Library And Gardens in Corona Del Mar California located?
The address of the Sherman Library And Gardens is: 2647 Pacific Coast Hwy, Corona Del Mar, CA 92625
