Want this question answered?
the reason is because its more important food ( health wise ) than the top
Natural Hydrodynamics. Same as in all birds nature has crafted them in a wedge shape for better movement through water or air.
Numerator on top; denominator on the bottom.
the top adds what the bottom adds. the top subtracts what the bottom subtracts. the top divides what the bottom divides. the top multiplies what the bottom multiplies.
bottom
The pressure of the water against the top of the dam wall, is much less than the pressure exerted against the bottom of the dam wall. The width of a dam wall increases to compensate for the increased water pressures at the lower level.
no, its thicker at the bottom
because the water pressure on the damn is much higher on the bottom of it than the top.
The pressure of the water (the weight) is greater at the bottom, due to the depth of the water. As the pressure is less near the top, the top of the dam wall doesn't need to be as thick as the bottom of the dam wall.
The Nurek Dam in Tajikistan is 714 meters at the top and 1,420 meters are the bottom. It is an earthen dam across the Vakhsh River.
there are mums down there
The pressure against the dam wall increases at the lower levels than nearer the surface. So I expect the foot of the dam wall to be thicker at the bottom than at the top.
Because the water pressure at the bottom of the dam is much more than the top.
Density of water per unit volume ie. g/cm3 * depth of water (cm). Answer will be in g/sq cm. Density of water is approximately 1g / cm3 therefore pressure at the bottom of a dam wall with 1m of water = 0.1kg / sq cm. Note: this is only valid at the bottom of the wall, half way up the 1m of water the pressure would be 0.05kg / sq cm. At the very surface of the water, there would be no pressure. Thats why a finger in a dyke (dike) can hold back the North Sea!
the reason is because its more important food ( health wise ) than the top
This is because the pressure in a liquid increases with depth. This means that the pressure at the bottom of the dam is more. Hence it is more liable to break out from the dam as more pressure is exerted on the walls. So, the walls are thicker at the bottom.
you measure at the top. Typically, pie pans are 8 or 9 inches.