Divide both sides by 12 to change to feet:-
8/12 times 16/12 = 8/9 square feet
500 sq feet = 500*12*12 = 72000 sq inches Each tile is 20*20 = 400 sq inches So, number of tiles required = 72000/400 = 180 This assumes that either the shape is such that only whole tiles are required or that all offcuts are used.
No because when u tile an octogon it doesn't have a measure for a square
Couple of ways to do perform this task: (1) The area of each tile is 18 x 18 inches = 324 square inches. Calculate the area of the room in Inches: 9 ft (108 in) x 12 ft (144 in) = 15552 square inches. Take the area of the room, divided by the area of each tile: 15552 sq in/ 324 sq in = 48 tiles. (2) Determine how many tiles you need to span the width of the room. 9 feet divided by 18 inches is the same as saying 9 feet divided by 1.5 feet = 6 tiles across Determine how m any tiles you need to span the length of the room. 12 feet divided by 18 inches is the same as saying 12 feet divided by 1.5 feet = 8 tiles across 6 tiles wide x 8 tiles long = 48 tiles.
Area to be covered: 15 x 16 = 240 square units Area of tile = 12 x 12 = 144 square units Number of tiles required = 240/144 = 1.66... . So 2 tiles will be sufficient.
The units of measurement for neither the tile nor the room are given. I can therefore assume that it is a 10 ft x 10 ft room and a 12 ft by 12 ft [carpet] tile. So answer: less than 1 tile.
1.78 sq feet per tile.
A square 20-inch tile is 2.78 square feet.
3.5555 square feet.
2.25 square feet
This tile has an area of 1 ft2.
1.78 square feet.
4,800 6-inch square tiles.
There are 144 18 square inch tiles in an area of 18 square feet.
It is not clear what is meant by an "18x18 square feet" tile. 18ft * 18 ft = 324 square feet, so that one tile will be more than enough. An 18 inch by 18 inch tile cannot be a 18x18 square feet tile.
1.78 square feet.
67.5
Approximately 96 square feet.