0
What are the coordinates for (2-1) vertical shift 2 units up and horizontal shift 6 units down?
Wiki User
∙ 6y ago
You cannot have a horizontal shift in the down direction: a horizontal shift must be left or right!
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
What are the coordinates of the point (12) after a translation right 9 units and up 3 units?
The coordinates are (10, 5).
What is the resultant of a 30 unit and 60 unit vector inclined to each other at 60 degrees?
Suppose the 30 unit vector is acting horizontally. Then the 60 unit vector has a horizontal component of 60*cos(60) units and a vertical component of 60*sin(60) units. So total horizontal = 30 + 60*cos(60) = 60 units total vertical = 60*sin(60)= 51.96 units. Then magnitude of resultant = sqrt(602 + 51.962) = sqrt(6300) = 79.37 units (approx). And direction = tan-1(51.96/60) = 40.89 degrees (from the 30 unit vector).
What are the coordinates of the point that is 4 units left and 2 units down from the origin?
(-4,-2)
Which coordinate or coordinates change when you translate a unit x units to the left?
The x-coordinate changes.
What information is conveyed by a point plotted with coordinates 10 40 Keep in mind coordinates are written as x coordinate y coordinate?
Given only the coordinates of that point, one can infer that the point is located 10 units to the right of the y-axis and 40 units above the x-axis, on the familiar 2-dimensional Cartesian space.
What is vertical change?
On a graph, the distance above and below the x-axis is given by the y-coordinate. Each point has a distinct location on the graph given by (x,y) where x represents the horizontal placement of the point and y represents the vertical placement. As you move from one point to another on the graph, your coordinates change. For example as you go from the point (2, 5) to (6, 15) your x-values went from 2 to 6, meaning they changed by 4 units (the difference in the x-coordinates). The x-values are your horizontal placements, so the horizontal change was 4 units. The y-values, are your vertical placements. They went from 5 to 15, a difference of 10 units, so the Vertical Change is 10 units. Put simply, the vertical change is the difference in the y-coordinates.
What does give the vertical and horizontal translation in units?
Not sure
Where are all points whose y-coordinates are -3?
On a horizontal straight line, three units below the x axis. On a horizontal straight line, three units below the x axis. On a horizontal straight line, three units below the x axis. On a horizontal straight line, three units below the x axis.
What is the highest resolution for TV today?
The highest resolution is used by HDTV, 16:9, which means 16 horizontal units for every 9 vertical units.
Is length measured vertical or horizontal?
Length can be measured either way. The actual definition of length is the longest dimension.A shape that is two units horizontal and three units vertical will have a length of 3, and in this case, the length is measured vertical. At the same time, a shape that is three units horizontal and two units vertical will also have a length of 3, but in this case, the length is measured horizontal.Many people make the mistake of thinking that length is always horizontal or always vertical. This is incorrect, however. The easiest way to see that this is false is to rotate the shape 90 degrees; this causes the length to change to what was before the width, and as such, length is not consistent, even though the shape is the same. Length is always the longest dimension. As such, width is always the dimension that makes a (two-dimensional) right angle with the length. This will always just be the other dimension in two-dimensional objects.
What are the two ways to describe a position?
If you mean in a 2-dimensional plane, the two ways I know of are Cartesian coordinates and polar coordinates. In the Cartesian coordinate system, there are 2 perpendicular axes, a horizontal and vertical (usually these are label x and y respectively). In this system, position is given by the distance from the origin (the center of the grid where x and y = 0) in the x and y direction. For example, if a point is 3 units away from the origin in the horizontal direction and 1 unit in the vertical the direction, the point is at (3,1) ( the 3 is the x and the 1 is the y). In polar coordinates, the position of a point is given by its distance from the origin (r) and the angle the line r makes with the horizontal axis. This angle is positive in the counterclockwise direction from the right side horizontal axis.
How many sinks can you install in 1 waste pipe?
well kitchen sinks are set at 2 fixture units and on a 2" drain you can have 4 because horizontal 2" line can have 8 fixtures units and 2" vertical can have 16 fixture units.
What are the coordinates if it is 4 units down and 3 units to the right?
In cartesian coordinates (x, y) = (3, -4)
What are the coordinates of the point (12) after a translation right 9 units and up 3 units?
The coordinates are (10, 5).
What is axis in math?
When you graph lines or points, the cross drawn behind them, labeled with numbers and units, are the axes. The horizontal line is the x-axis, and the vertical the y-axis.
How do you calculate the aspect ratio of a screen?
The aspect ratio of a computer monitor or a television screen is its horizontal length divided by its vertical length, both measured in the same units.
How do you find the coordinates of a point on as coordinate grid?
a coordinate grid is written as the horizontal line is the values of the x-coordinate and the vertical line is the values of the y-coordinate. lets say you have the points (2,3) whenever you see this ( , ) this is called an ordered pair. the x-coordinate always comes first and the y-coordinate comes second.. like this.. (x,y) in the coordinate i gave as an examples (2,3) the 2 is the x-coordinate and 3 is the y-coordinate. first take the x-coordinate. since the horizontal line is for the x-values then you apply the 2 to this horizontal line. the 2 implys that you go over 2 units. since the number 2 is positive you go to the right of the intersection of the two lines. if the two was -2 then you would go left. now take the y-coordinate. since the vertical line is for the y-values then you apply the 3 to the vertical line. the 3 implys that you go up 3 units. since the 3 is positive then means you go up instead of down. if the 3 were a -3 then you would go down three units. now that you have gone 2 units to the right and then 3 units up you should have a dot that is above the horizontal line and the dot should also be to the right of the vertical line. always remember that the point at which your horizontal line (this is for your x-values) and your vertical line (this is for your y-values) is called the point (0,0) this is called the origin. when you are trying to find the coordinate points always start counting from the origin (0,0).
