Diameter = Circumference / Pi Diameter = 16 / 3.14 Diameter = 5.095
The diameter of a circle is twice the radius. A radius is half of a diameter.
The circumference of a circle with a diameter of 55 mm is: 172.8 mm
The radius of a circle is equal to half of it's diameter. To convert the diameter into the radius, simply divide it by two.For example: if the diameter is 10, then the radius would be 5
The diameter of a circle is twice the radius.The diameter of a circle is twice the radius.The diameter of a circle is twice the radius.The diameter of a circle is twice the radius.
For a pulley, it is driver RPM x driver diameter = driven RPM x driven diameter. Keep in mind that the diameter you should use is the diameter where the belt is riding in the pulley. For instance, an A belt in an AB pulley will ride lower in the pulley than it would in an A pulley. For sprockets, the formula is the same, but replace the diameter with # teeth. It looks like this. driver rpm x # teeth of driver sprocket = driven RPM x # teeth of driven sprocket
Force multiplier. It an inclined plane so a smaller force is acting over a greater distance
A screw driver is a lever. The bigger diameter of the handle compared to the tip amplifies the turning force.
steel wool (wet s.o.s. pad) or rubbing compound
On the firewall in front of the driver right behind the master cylinder, it's a round black flat cylinder about a foot in diameter.
A screwdriver is a type of simple machine known as a lever. It allows for the application of force to rotate a screw, making it easier to insert or remove.
It's an in-line filter. Cylinder-shaped and about 3-4 inches in diameter. It's attached to the frame on the driver's side below the driver's door. It's held in place with a large worm-gear type hose clamp.
If you mean the diameter of a circle with area pi, then the diameter is 2. If you mean the diameter of a circle with circumference pi, then the diameter is 2. If you mean the diameter of a circle with diameter pi, then the diameter is pi. If you mean the diameter of a circle with radius pi, then the diameter is 2pi.
nominal diameter is the original diameter of an object
Master cylinder, located on firewall, driver's side, mounted to the brake booster. A very large circular object about 10" in diameter.
It's on the driver side close to the firewall. The fluid type is indicated on the top which is about 2 1/2 to 3 inches in diameter.
It is on the door about half way up to the outside of the door, the sensor looks like a black circle about 2 inches in diameter