Count the number of zeros to the left of the decimal point in the multiple of ten that you are using: Examples: 10 (1 zero); 1,000,000 (6 zeroes); 100.0 (2 zeroes) Move the decimal point to the right by that number of spaces (if you run out of spaces to move the decimal point then add a zero) Examples: 5 * 1,000 = 5000 .005 * 10000 = 50 5000 * 10 = 5000
Trick: when multiplying any number by 10, your answer will be the number with a zero at its end. So: 15 x 10 = 150
The product is obtained by multiplying two numbers. The product obtained by multiplying a number by 1 is equal to the number, i.e. 1 x 10 = 10(product). Therefore the product of any number and 0 is always 0.
The least common multiple is the smallest positive number that is a multiple of two or more numbers. 8: 16, 24, 32, 40 10: 10, 20, 30, 40 The least common multiple for 8 and 10 is 40.
Let's say that you were multiplying 10 by 2/5 , you would turn the 10 into 10/1 which is still equal to 10 then you multiply 10/1 and 2/5 by multiplying the numerators (the top numbers) and the denominators (the bottom numbers) 10*2/1*5 = 20/5 = 4
5(10^(-2)) = 5 / (10^2) = 5/100 = .05 because multiplying any number by a negative exponent (such as 10^(-2)) is the same as dividing by its reciprocal (10^2)
Move the decimal point, the same number of places as the power of 10. That way ---> to multiply. This way <--- to divide.
Just add a zero after the number. 123 x 10 = 1230
A multiple is found by multiplying the number. Whereas a factor is what the number can be divided by. For example - multiples of 10 are; 10, 20, 30, 40, ... Factors of 10 are; 1, 2, 5, 10
It is a number, usually multiple of 10, that we have to multiply the reading of the measurement with, in order to have the true number. So if the reading is 1,23456 and the multiplying factor is 100, then the true number is 123,456.
The multiple of ten can be reduced to the smaller number by moving the decimal place of the numerator one place to the left. However, this may only be a marginal short cut. For example, dividing 1256 by 3450 is equivalent to dividing 125.6 by 345 but that is hardly a shortcut!
20
A multiple is the result of multiplying a number by an integer. 5: 5, 10, 15, 20
Multiplying a whole number by 10 adds a zero onto the end of the number. For example, 7 x 10 = 70.Multiplying a decimal number by 10 moves the decimal point one place to the right. For example, 3.75 x 10 = 37.5.
You can decrease a number by 10 percent by multiplying it by 0.9
Multiplication means adding numbers repeatedly. 4 x 2 = 8. If a multiplying number is 10+, ( No idea :( )
we normally say 6 is a multiple of 2 and 3 which means by multiplying 2 and 3 we can get 6 or 10 is a multiple of 2 and 5 which in result gives 10 thats what multiple mean.
Multiples are formed by multiplying a number by successive counting numbers. The multiples of 10 are 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 and so on.