He covered 115 square feet per gallon. - Way below the average, which is about 280 sf per gallon.
2.81 gallons for every 1/100 of an inch thick. Most paints are applied at 4 mils wet, so they usually cover about 400 square foot per gallon. So you'd need about a gallon and a quart to cover 450 square feet.
7.7 gallons.
Common gallons of paint cover approximately 400 square feet. 1800 divided by 400 is 4.5. That is 4 and one half gallons or I would buy 5 gallons in case I lose some when I clean up or if there is a spill.
The standard coverage for a gallon of interior paint, applied in a single coat, over a sealed or primed wall in good condition is approximately 400 square feet. Under similar circumstances a half gallon should cover approximately 200 square feet.
If your drum is a 55 gallon drum and your paint can cover 400 square feet per gallon then you may cover (one coat only) a square almost 150 by 150 feet.
2.81 gallons for every 1/100 of an inch thick. Most paints are applied at 4 mils wet, so they usually cover about 400 square foot per gallon. So you'd need about a gallon and a quart to cover 450 square feet.
How many square feet does a gallon of the adhesive cover? RTFM, noob.
A square unit is equal to 100 square feet so 2200 square units equals 220,000 square feet. One gallon of paint will cover approximately 400 square feet which means 550 gallons of paint are needed. If you plan on a double coat 1,100 gallons are needed. It will take 550-1,100 1 gallon cans of paint to cover 2,200 square units.
1 gallon of paint to cover about 350 square feet You need slightly more than a gallon if the walls are unpainted drywall, which absorbs more of the paint
7.7 gallons.
yes, for smooth surface you can get 300-400 sq ft per gallon, so two gallons will allow 2 coats
Common gallons of paint cover approximately 400 square feet. 1800 divided by 400 is 4.5. That is 4 and one half gallons or I would buy 5 gallons in case I lose some when I clean up or if there is a spill.
how many square feet would 1 gallon of water come on at 1 inch deep?
1 square foot = 144 square inches1 gallon = 231 cubic inchesVolume = (16 x 144 x 6) = 13,824 cubic inches = (13,824 / 231) = 59.844 gallons (rounded)
It takes 0.6234 gallon (rounded) to cover one square foot of area 1 inch deep.
700/45 = 15.5 gallons
Approximately seven to eight gallons.