That can't be done. Feet is an US amercan length unit and decibel loss is a ratio.
How do I convert a .db file?
yes
If I understand the question, it isn't possible to convert dB (a unit of sound energy) to litres (a unit of volume).
To convert dB to dBi (decibels isotropic), you need to add 2.15 dB to the dB value. This adjustment accounts for the difference in reference points used in the two scales. So, if you have a value of x dB, the equivalent value in dBi would be x + 2.15 dBi.
dB (decibel) is a logarithmic measure of the ratio of two power values, for example, two signal strengths. This is often used for power gain or power loss. For example, a loss of 10 dB means that the signal degrades by a factor of 10, a loss of 20 dB means that the signal degrades by a factor of 100, and a loss of 30 dB means that the signal degrades by a factor of 1000.
Power loss in dB is a measure of how much power is lost in a signal as it travels through a medium or a system. It is calculated using the formula: Power loss (dB) = 10*log10(P1/P2), where P1 is the initial power and P2 is the final power. The higher the power loss in dB, the more power is lost in the signal.
dB SPL is a comparison of a sound level to what was thought to be the threshold of hearing, although today it is known that the value was too high. dB HL is a measure of hearing loss - a comparison of a subjects hearing compared to a 'normal' standard. As they are measure different things a direct comparison is not possible. The differences between dB HL and dB SPL, arise from isophonic curves. There is no direct (linear) formula to convert this but a set of formulas. For different frequencies, different values should be added. For eg., at 1kHz you can state that 0dB HL is around 2dB SPL while at 250Hz, 0dB HL is 12 dB SPL. db HL = db Hearing Level db SPL = db Sound Pressure Level
To convert from dB (decibels) to mW (milliwatts), you can use the formula: mW = 10^(dB/10). Simply take the dB value and divide it by 10, then raise 10 to that power to get the mW value. For example, if you have 20 dB, the calculation would be mW = 10^(20/10) = 100 mW.
It is impossible to convert dB to dBA. There is only a guess. Scroll down to related links and read "Correlation between sones und phons".
To convert power in watts to decibels (dB), you can use the formula: dB = 10 * log10(P2/P1), where P1 is the reference power (usually 1 watt) and P2 is the power you are converting (40 watts in this case). Plugging in the values, you would calculate: dB = 10 * log10(40/1) = 16.02 dB.
20.96
If there is a 3db loss that means 50 percent of the light were lost.