Depends on the size of your patio.
To determine how many bags of sand are needed for 64 square feet, you first need to know the depth of sand you plan to apply. For example, if you're applying a 1-inch depth, you would need about 0.5 cubic yards of sand, which translates to approximately 13-14 bags (assuming each bag is 0.5 cubic feet). Adjust the number of bags based on the desired depth and the size of the bags. Always check the specific bag dimensions and coverage information for more accurate calculations.
0.42cub.m (Cement sand mortar)
To determine how many bags of concrete are needed for a 10x10 patio, you first need to calculate the volume of concrete required. A 10x10 patio is 100 square feet, and if you plan for a thickness of 4 inches (0.33 feet), the volume would be 100 sq ft x 0.33 ft = 33 cubic feet. Since standard concrete bags are typically 80 pounds and cover about 0.6 cubic feet, you would need approximately 55 bags of concrete (33 cubic feet ÷ 0.6 cubic feet per bag).
First you need know how much(in volume) the bag makes. Lets say a bag makes L cubic feet. where L is a whole number. 2 inches =1/6 ft volume of patio (assuming its a rectangular prism) is 10x16x(1/6) = 80/3 number of bags = (80/3)/L = 80/3L. * If this number isn't a whole number, round to the next whole number.
you wouldn't even need 1 bag of cement and there are also lots of variables, thickness, mix ratio, bag sizes?
To determine how many bags of sand are needed to make 1 cubic yard, you first need to know the size of the sand bag. A standard bag of sand typically contains 0.5 cubic feet. Since there are 27 cubic feet in a cubic yard, you would need 54 bags of sand (27 cubic feet divided by 0.5 cubic feet per bag) to make 1 cubic yard.
10
You need10.8/(the number of cubic feet of sand in each bag) bags.
65KG
To convert the weight of the sand into a volume and find out how much you need you would need to know the density of the sand as the more dense it is the less sand there will be in a 50lb bag and the more bags you would then need to fill the yard
The answer will depend on how deep a layer of sand.
The number of bags of sand needed for a ton depends on the weight of each bag. Standard bags of sand typically weigh 50 pounds. Since there are 2,000 pounds in a ton, you would need 40 bags of 50-pound sand to equal one ton.
You would need to ask the people at bq.
It depends on the volume of the bag and how deep you want the gravel to be.
"If you are looking for a good sand bag supplier, there are plenty that you can order from over the internet, such as sandbagexpress.com." "United bags is a good sand bag supplier, very fast shipments."
The number of bags of sand in a cubic meter depends on the size of the bag. Typically, a standard bag of sand weighs around 25 kg and contains about 0.015 cubic meters of sand. Therefore, you would need approximately 67 bags (1 cubic meter / 0.015 cubic meters per bag) to fill 1 cubic meter, assuming no voids or compaction. Adjustments may be necessary based on the specific bag size used.
No you don't have to have a sand wedge in your bag, but I would recommend you have at least one wedge in your bag for chipping and pitching.