0
What else can I help you with?
How many btu's in office water-cooler?
There are no BTUs in an office water-cooler. But you can calculate how many BTUs are removed by the cooler. One BTU or British Thermal Unit is the amount of heat energy required to raise the temperature of one pound of water one degree Fahrenheit. There for when you remove one BTU you are lowering one pound of water one degree Fahrenheit. So if you know how many pounds of water you have and the temperature of the water you start with and the temperature of the water comming out of the cooler you can calculate how many BTUs the cooling unit of the water cooler has removed. BTU=Temp1 - Temp 2 X LB water
How many btu's would it take to heat 120 gallons of water to 210 degrees f in 2 hours?
To calculate the BTUs required to heat 120 gallons of water to 210°F, first determine the temperature rise needed. Assuming the initial water temperature is around 60°F, you would need to raise it 150°F (210°F - 60°F). The BTU calculation is: [ \text{BTUs} = \text{gallons} \times \text{temperature rise} \times 8.34 ] So, [ \text{BTUs} = 120 \text{ gallons} \times 150°F \times 8.34 \approx 1,500,600 \text{ BTUs}. ] To heat this in 2 hours, you would need about 750,300 BTUs per hour.
How hot is 5000 btus?
BTUs, or British Thermal Units, measure energy rather than temperature directly. A rating of 5,000 BTUs typically indicates the heat output of an appliance, like an air conditioner or heater, rather than a specific temperature. For context, 5,000 BTUs can cool or heat a small room, but the actual temperature achieved will depend on factors like room size, insulation, and external conditions.
How many BTUs are needed to heat 1600 sq ft one level home?
To heat a 1,600 square foot one-level home, you typically need between 30 to 60 BTUs per square foot, depending on factors like climate, insulation, and the home's design. This translates to approximately 48,000 to 96,000 BTUs for the entire space. A common estimate for moderate climates is around 40 BTUs per square foot, resulting in about 64,000 BTUs needed for effective heating. Always consider local conditions and consult a heating professional for a more tailored assessment.
How many btu's of heat do I need for 600sf?
To determine the BTUs needed for a 600 square foot space, a general rule of thumb is to use about 20 BTUs per square foot. Therefore, you would need approximately 12,000 BTUs (600 sq ft x 20 BTUs/sq ft). However, factors such as insulation, ceiling height, and climate can affect this estimate, so it's advisable to consider specific conditions for a more accurate calculation.
How much heat is required to vapourize 5 pounds of water?
It takes approximately 970 BTUs to vaporize one pound of water. Therefore, for 5 pounds of water, it would require 4850 BTUs to vaporize all of it.
How many BTUs does it take to raise the temperature of water from 32 degrees to 300 degrees?
That will completely depend on how much water there is.
How many BTUs are required to raise the temperature of 15 pounds of water from 100F to 120F?
To calculate the BTUs required to raise the temperature of water, you can use the formula: BTUs = (pounds of water) x (temperature change in °F) x (1 BTU). For 15 pounds of water going from 100°F to 120°F, the calculation would be: BTUs = 15 pounds x 20°F x 1 BTU = 300 BTUs.
How many drams are in 12ounce?
12ounces equals 192dr
How many btus are required to change one pound of ice at 20 f to steam at 220 f?
It takes approximately 144 BTUs to change one pound of ice at 20°F to water at 212°F, and an additional 970 BTUs to change the water to steam at 220°F, for a total of 1114 BTUs.
How many btus are required to raise the temperature of 15 pounds of water from 100 degrees fahrenheit to 130 degrees fahrenheit?
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
How many btus does it take to turn water into steam?
It takes approximately 970 BTUs to convert one pound of water at 212°F (100°C) to steam at the same temperature.
12ounce equal how many pound?
0.75 or 3/4 pound.
How many btus will it take to raise 50 pounds of ice at 32 degrees to water at 160 degrees?
To raise 1 pound of ice from 32°F to water at 32°F it requires 144 BTUs. Since you have 50 pounds of ice, you would need 50 * 144 BTUs to raise the ice to water at 32°F. To further raise the water from 32°F to 160°F, you would need an additional amount of BTUs based on the specific heat capacity of water.
How many BTUs does it take to raise the temperature in a 40 gallon water heater 60 degrees F?
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
What is the BTU formula?
BTUs, or British Thermal Units, measure the amount of heat energy required to raise the temperature of one pound of water by one degree Fahrenheit. The formula to calculate BTUs is: BTUs = weight of water (in pounds) x temperature change (in degrees Fahrenheit) x 1. Alternatively, the formula can be expressed as: BTUs = (Flow rate in gallons per minute x change in temperature in degrees Fahrenheit) / 500.
How many Btus will it take to raise 10 pounds of water from -5 to 220 Degrees?
2250
