0
How many btu's would it take to heat 120 gallons of water to 210 degrees f in 2 hours?
To calculate the BTUs required to heat 120 gallons of water to 210°F, first determine the temperature rise needed. Assuming the initial water temperature is around 60°F, you would need to raise it 150°F (210°F - 60°F). The BTU calculation is:
[ \text{BTUs} = \text{gallons} \times \text{temperature rise} \times 8.34 ]
So,
[ \text{BTUs} = 120 \text{ gallons} \times 150°F \times 8.34 \approx 1,500,600 \text{ BTUs}. ]
To heat this in 2 hours, you would need about 750,300 BTUs per hour.
What else can I help you with?
The temperature dropped 2 degrees farinheight every hour for 6 hours what was the total number of degrees the temperature changed in 6 hours?
If the temperature dropped 2 degrees Fahrenheit every hour for 6 hours, the temperature would change 12 degrees. You multiply 2x6 to get the answer of 12.
How do you prepare a 1 percent solution?
You would mix 1 part something with 99 parts something else, so if you were preparing a 1% solution of salt in water, you would put if you wanted to make 6.25 gallons of this, you would have 1 cup of salt and 99 cups of water.
How many gallons in 3 pounds of shortening?
It would be less than half a gallon. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.
What percent would 4 degrees be?
4 degrees would be 4/360*100 or 1.11%.
How much water fills a 24x12.5x12.5 tank?
To determine the volume of water that fills a tank with dimensions 24 inches long, 12.5 inches wide, and 12.5 inches high, you can use the formula for volume: length × width × height. This gives you a volume of 24 × 12.5 × 12.5 = 3,750 cubic inches. If you want to convert this to gallons, there are about 231 cubic inches in a gallon, so the tank would hold approximately 16.24 gallons of water.
How many gallons of boiling water would you have to add to a five hundred gallon tank to raise the temperature twenty degrees?
how hot is the boiling water? That makes a big difference? (is that a homework question?) I'm just trying to apply logic here, bear in mind there may be some special properties that you may have to account for like the glass/plexiglas that the water is in will have to have its temp raised also. So here goes... Raising 500 gallons of water 20 degrees would seem to require a combined value of 10,000 degrees (500 gallons times 20 degrees). So first you need to know the temperature difference between the existing water and boiling. Then devide the resulting difference into the 10,000 degrees for your simplistic answer. However, it is a bit more complicated if the tank is full at 500 gallons because you have no room to add the boiling water. That is, it would roughly take 62 gallons of boiling water to raise 500 gallons of 50 degree water to 70 degrees and the tankwouyld obviously overflow. So if it was already full you would have had to remove 62 gallons first leaving 438 gallons and consequently reducing your degree needs to 8760 degrees which means if you add the 62 gallons of boiling water you would have ended up with 72.7 degree water. So, I'd reduce the capacity to 445 gallons and add 55 gallons of boiling water and you should be pretty close.
How much dry ice would it take to cool 30000 gallons of water by 5-8 degrees?
To cool 30000 gallons of water by 5-8 degrees, you would need approximately 215-320 pounds of dry ice. Each pound of dry ice can cool about 10 gallons of water by 1 degree. So, for a 5-8 degree temperature drop in 30000 gallons of water, you would need to use 215-320 pounds of dry ice.
How long would it take 10 gallons of cold water to freeze at -0.5 degrees centigrade?
The time it takes for 10 gallons of water to freeze at -0.5 degrees Celsius depends on various factors such as the starting temperature of the water, the container material, and the surrounding environment. Generally, it could take several hours to overnight for water to freeze at that temperature.
How many gallons of 120 degree water would it take to raise 5 gallons of 65 degree water to 70 degrees?
Suppose G gallons are used. Before mixing, you have 5*65 + G*120 = 325 + 120G gallon-degrees. After mixing, you have (5+G)*70 gallon-degrees So 325 + 120G = (5+G)*70 = 350 + 70G So 50G = 25 G = 0.5 gallons.
1000 lbs steam how many gallon water?
The number of pounds in a gallon of water changes with temperature. At 100 degrees Celsius, there is about 8 lbs. per gallon of water. So with one thousand lbs. of steam, we would have around 125 gallons of water.
How much would 200 gallons of water weigh?
200 gallons of water would weigh approximately 1,667 pounds.
How many gallons of water is 150 tons?
There are approximately 224 gallons of water in 1 ton. Therefore, 150 tons of water would be around 33,600 gallons.
What would be 230 pounds of water how many gallons?
230 pounds of water would be equal to approximately 27.6 gallons.
600 pounds of water is how many gallons?
600 pounds of water is equivalent to approximately 71.6 gallons.
If the pool was leaking 1 2 hour the pool has leaked 7 8 gallon of water how many gallons of water per hour is the swimming pool leaking?
If a pool was leaking for 12 hours and leaked out 78 gallons of water in total, then it would of leaked out 6.5 gallons every hour. This is a math problem.
Does 20 pounds equal 4 gallons?
Of water no. Water would be about 32 pounds in 4 gallons.
Is 5 gallons of water heavier than 5 gallons of sand?
Five gallons of sand would actually weigh more than five gallons of water.
