The indicator you want is located between the 2 and the 3 on the ruler. Your challenge is to convert the decimal number -- .75 -- to the fraction 3/4ths. Rulers usually indicate distance in fractions.
2 and 3/4 of an inch.
Two and three quarters
In between 1 and 2
1.375
A 30cm ruler is about 12 inches. so 90cm is 36 inches + 2 so about 38 inches
measure it with a ruler
38% of 275 = 38% * 275 = 0.38 * 275 = 104.5
0.75% of 275= 0.75% * 275= 0.0075 * 275= 2.0625
38% of 275 = 38% * 275 = 0.38 * 275 = 104.5
1 foot = 12 inches. So, 275 inches = 275 / 12 = 22.916 feet.
As a fraction, it is 275/1 inches.
69.85 centimeters
Where is 0.71 inches on the ruler
275 millimeters is ~10.83 inches.
There are approximately 73,921 cubic inches in a 275 gallon cylinder.
275/36 = 7.63889 yards
3.166667 inches is 3.166667 inches, whether on a ruler or anywhere else.
275 centimeters is 9 feet and 0.27 inches.
10.82677165 in Direct Conversion Formula 275 mm* 1 in 25.4 mm = 10.82677165 in
Depends on the length of the ruler A 6 inch ruler would show 6 whole inches A 12 inch ruler would show 12 whole inches.
It is 2/10 past the one inch mark on a ruler.