0
What else can I help you with?
Will be transfer or will be transferred?
"Will be transferred"; a passive voice verb form always requires the past participle of the prinicpal verb, and the past participle of "transfer" is "transferred".
What are the features of an MPC 1000 sampling production station?
A MPC 1000 sampling production station has many amazing features such as 32-voice stereo sampling, 64-tracking sequence, and 16 velocity and pressure-sensitive MPC pads.
What energy is transferred by speaking into a telephone?
Sound energy is transferred when speaking into a telephone. The vibrations caused by the sound of our voice are converted into electrical signals that are then transmitted through the telephone line to the receiving end.
What was the first popular music format to use digital data instead of analog data?
CD-DA or .cda, also known as Red Book audio standard, the Sony Phillips compression algorithm created for voice digitization, but adopted for music CD's.
When analog voice signal converts into digital signal the bandwidth needs 64kbps. Why?
PCM technique is used to convert analog voice signals into digital. In PCM the analog frequency is first sampled and then converted into binary bits. Each samples are taken as 8bits long. Basic communication theory requires that a minimum sampling rate of twice the frequency of the signal to be sampled will result in an accurate representation of the original signal.Human voice can have max 4000hz frequency, therefore sampling rate should be 8000 samples/sec.Which implies required bit rate for transmitting voice is 8000*8 = 64000 bits/sec = 64kbps.
A voice signal sample is stored as one byte Frequency range is 16 Hz to 20 Hz What is the memorysize required to store 4 minutes voice signal?
It's 1920Bytes. As the bandwidth (f2-f1) is 20-16=4Hz. The sampling frequency should be twice the bandwidth (2B). the sampling frequency is 8Hz= 8 samples= 8 cycles/second. 4 minutes=(4*60) =240 Seconds 1sample->1 Byte 1Second->8 Samples 240 Seconds->(240*8) = 1920 Samples
How is the data rate for PCM digital voice signals 64 Kbps calculated?
The data rate for Pulse Code Modulation (PCM) digital voice signals is calculated using the formula: Data Rate = Sampling Rate × Bits per Sample. For standard voice applications, the sampling rate is typically 8 kHz (samples per second), and each sample is represented by 8 bits (1 byte). Thus, the calculation is 8,000 samples/second × 8 bits/sample = 64,000 bits per second, or 64 Kbps. This rate is sufficient to capture the frequency range of human speech effectively.
Why ds0 is having bw why single channel consist of 64kbps bandwidth?
The standard sampling for digitized voice rate is 8000 times per second with 8 bits per sample providing for 64,000 bits per second or 64kbps.
What is FSK in telecommunication?
FSK stands for Frequency Shift Keying. It allows for voice and data to be digitized and transferred over analog lines. There is a maximum transfer rate of FSK data at 1.6 Mbps.
How do you edit a recorded voice on korg OASYS?
Other than punching in/out and editing by locators, there is very little audio editing on the audio tracks of the Oasys. The sampling functions allow more editing, but these are for assiging short samples to keys for real-time triggering.
In episode 118 of naruto is the guy with gray hair whos aura is transferred to orochimarus the same voice actor as ichigo kurasaki from bleach?
Masakazu Morita (a.k.a. Ichigo Kurosaki) doesn't voice act in Naruto.but the "gray" haired guy... did u mean this guy? (check out the link)http://i219.photobucket.com/albums/cc170/Seshimaru/Kimimaro.jpg(he's voice actor is Toshiyuki Morikawa)
What is God's voice?
God's voice is when He speaks directly, as at Mount Sinai. God's voice is the voice of prophecy. God's voice is the message of the vast wisdom in the world around us. God's voice is the voice of our soul and our conscience.
