You would have to know the weight of stones in one cubic foot (or another unit of volume) to know this. If "stones" refers to a unit of weight than your question doesn't make sense.
To determine the weight of a cubic meter of 13mm building stone, we need to know the density of the stone. Assuming a typical density of 2.6 grams per cubic centimeter for building stone, we can convert this to kilograms per cubic meter by multiplying by 1000. Therefore, a cubic meter of 13mm building stone would weigh approximately 2600 kilograms, or 2.6 metric tons.
How to convert cubic meters to tons of armour rock with 2.7 specific
To convert 2.66 tons per cubic meter to tons per cubic feet, you first need to convert cubic meters to cubic feet. There are approximately 35.3147 cubic feet in 1 cubic meter. Once you have the conversion factor, multiply the given value (2.66 tons per cubic meter) by the conversion factor to get the equivalent value in tons per cubic feet.
Each stone weighs roughly between 25-30 tons
To convert cubic yards of sand to tons, you can use the following formula: 1 cubic yard of sand is approximately equal to 1.35 tons. Therefore, 9800 cubic yards of sand would be approximately equal to 9800 * 1.35 = 13230 tons.
To convert tons to cubic feet (cft), you need to know the density of the material in question. The formula for converting tons to cubic feet is: cubic feet = (tons / density). For example, if you have 2 tons of a material with a density of 100 pounds per cubic foot, the conversion would be: cubic feet = (2 tons / 100 lb/ft^3) = 0.02 cubic feet.
To convert cubic meters of asphalt to tons, you need to know the density of the asphalt, which typically ranges from about 2,200 to 2,400 kg/m³. Multiply the volume in cubic meters by the density to get the mass in kilograms, then divide by 1,000 to convert to tons. For example, if the density is 2,300 kg/m³, then 1 cubic meter of asphalt would equal approximately 2.3 tons.
To convert cubic meters (m³) to tons, you need to know the density of the material you are converting, as tons measure weight while cubic meters measure volume. The formula is: tons = cubic meters × density (in tons per cubic meter). For example, if the density of the material is 2 tons/m³, then 1 m³ would equal 2 tons. Always ensure to use the correct density corresponding to the specific material for accurate conversion.
The conversion factor from cubic meters to metric tons depends on the density of the substance being measured. To convert, you need to know the density of the material in question in units of metric tons per cubic meter. Then, you can multiply the density by the volume in cubic meters to determine the mass in metric tons.
You don't. Cubic yards is volume while yards is distance.
The number of wheelbarrows of stone dust in 20 tons depends on the size of the wheelbarrow. A standard wheelbarrow typically holds about 6 cubic feet of material, and one ton of stone dust is approximately 1.5 cubic yards, or about 40 cubic feet. Therefore, 20 tons of stone dust is around 800 cubic feet. Dividing 800 cubic feet by 6 cubic feet per wheelbarrow gives approximately 133 wheelbarrows of stone dust.
22.5