That is like asking how high is up. The size of bales of straw varies widely. I can take a 30 lbs bale and cover a 10 by 12 stall for birthing just fine.
1000
A standard bale of straw typically covers about 80 to 100 square feet when used as mulch or ground cover. The exact coverage can vary based on the thickness of the layer applied. If the straw is spread more thinly, it may cover a larger area; conversely, a thicker layer will reduce coverage.
It will depend on the size of the bale. Bales come in different sizes, but most will cover somewhere between 20 square feet to 120 square feet at about 2.5 to 3 inches deep. Ask that question when purchasing your bales since the size does vary considerably and some bales are machined compressed and some are hand compressed. For that reason, just looking at a bale and comparing the sizes does not always tell you how many square feet a particular bale will cover.
To cover 2000 square feet with a few inches of straw, you typically need about 2 to 3 bales of straw per 100 square feet for a depth of 2-3 inches. Therefore, for 2000 square feet, you would require approximately 40 to 60 bales of straw, depending on the thickness of the coverage and the density of the straw. It's essential to consider the specific type and packing of the straw bales, as they can vary in size and weight.
That really depends on the size and weight of the bale, as well as the depth of the cover. One large round bale of hay can be unrolled for at least 20 or 30 yards with a depth of 8 inches, where as a small square will only cover 5 square feet of area if all the flakes were put together in a square or rectangle.
A small rectangular bale of hay typically measures about 2 feet by 3 feet by 1.5 feet, covering an area of around 6 square feet (2 feet x 3 feet) on the ground. However, the actual coverage can vary slightly depending on the specific dimensions of the bale.
To cover 5,000 square feet with straw, you'll need approximately 2 to 3 tons of straw, depending on the desired thickness of the layer. A standard coverage rate is about 1 ton of straw for every 1,500 to 2,500 square feet for a 2 to 3-inch depth. Adjust the quantity based on your specific coverage needs and the type of straw used.
I would guess about 70-80 bales
One bale of pine straw typically covers about 40 to 50 square feet at a depth of 3 to 4 inches. The exact coverage can vary based on the thickness of the application and the size of the bale, which generally weighs around 15 to 20 pounds. For optimal results, it's best to adjust the amount based on your specific landscaping needs and the desired appearance.
A standard bale of pine straw typically measures about 2 feet long, 2 feet wide, and 1 foot high, although sizes can vary slightly depending on the supplier. Each bale usually weighs between 15 to 20 pounds. The compact size makes it easy to handle and transport for landscaping purposes.
Tiles that are two feet on a side cover 4 square feet. 378 of them cover 1512 square feet.
A bundle of Shingles will cover roughly 33 square feet. A square of Shingles (3 Bundles) will cover 100 square feet.