answersLogoWhite

0

A typical room can have 5 to 6 times more volume than the 200 cu.ft given.

Example: 15 ft long x 10 ft wide x 8 ft high = 15*10*8 = 1200 cu.ft.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How many potatoes would fill a cubic mile?

it would depend on the size and packing density of the potatoes


What space in feet would be required to store 25 cubic meters?

This would require an area of 269.1 square feet.


What is the volume of one cubic yard of concrete after being crushed to three quarter inch?

Assuming a packing fraction of 74%, it would be 1/0.74 = 1.35 cubic yards.


Space in a cabinet is it square unit or units?

The space in a cabinet is the VOLUME of the cabinet. It would be cubic units.


How many cubic feet are in a 330 gallon tote?

ten gallons is about one and a third cubic feet, so I would say that 30 gallons is about 4 cubic feet


If I have a 2.3 inch in diameter sphere. How many spheres would it take to fill a 100 gallon cube?

A 100 (US liquid) gallon cube is 23100 cubic inches. The maximum proportion of a cube which can be filled by spheres, using cubic closed packing or hexagonal close packing is approx 74.05%. Consequently, the spheres can occupy at most 17105 cubic inches. This volume implies a maximum of 335 spheres.You cannot divided the volume of the cube by the volume of each sphere because spheres can never occupy all the space in any shape.


How would estimate the volume your backpack could hold?

Fill your pack with packing peanuts. Dump them out into a cardboard box and level them out. Measure the width and depth of the box and the height of packing peanuts. For cubic inches, multiply the width, depth and height.


Could you fit one thousand drinks cans in one cubic metere?

Yes, you could fit one thousand drink cans in one cubic meter. A standard aluminum drink can has a volume of about 355 milliliters, so one thousand cans would occupy approximately 355 liters, which is significantly less than one cubic meter (1,000 liters). Therefore, there would be ample space to accommodate them, even allowing for some additional room for packing.


Kilogrammes per cubic tonne?

There can be no such measure as a cubic tonne: that is mass cubed and you would probably need 12 dimensional space for that!


Which term describes how much space a substances occupies?

volume


What are some real world applications for the cubic function?

For someone packing whole house the cubic function is important to factor the amount of storage needed to move a home. Another real application would be in manufacturing and filling a box with product.


How many liters would fill a cubic centimeter of space?

One cubic centimeter (cm3 or cc) is equal to one milliliter (mL).To answer the question . . . 1 cubic centimeter = 0.001litre.