Wiki User
∙ 11y ago3 ft x 4 ft x 2 ft = 24 ft3
Wiki User
∙ 11y agoThere is no dirt in a hole, as a hole is an empty space where dirt has been removed.
There is no dirt in a hole because a hole is defined by the absence of material, in this case dirt. If you were to fill the hole with dirt, it would require 24 cubic feet of dirt to completely fill it.
The depth of dirt can vary greatly depending on location and other factors. In general, topsoil can range from a few inches to several feet deep before reaching the subsoil or bedrock below. Factors such as climate, vegetation, and geological history can influence the depth of dirt in a particular area.
To determine the volume of dirt in this scenario, you would multiply the area (3 acres) by the depth (200 feet). First, convert acres to square feet (1 acre = 43,560 square feet). Then, multiply the area (3 acres = 130,680 square feet) by the depth (200 feet) to find the total volume of dirt.
There are 27 cubic feet in a cubic yard. So, if you have 1 cubic yard of dirt, it is equivalent to 27 cubic feet of dirt.
A yard of dirt is equivalent to 27 cubic feet in volume, or a cube that measures 3 feet in length, width, and height. This amount of dirt can cover an area of 9 square feet at a depth of 3 feet.
none.
All of it
There is no dirt. It's a hole.
There is no dirt in a hole that is 3 feet deep and six inches in diameter.
If it's a hole, there would be no dirt in it, right?
36 cubic feet of dirt=)
none
96 cubic feet
None but the hole can be filled in with dirt with the given dimensions.
none there is no dirt in a hole
None. The size of the hole is a measure of space in which there is no dirt!
There is no dirt in a hole. If the hole is being dug, the amount of dirt being removed would be equal to the volume of the hole, which is 3 feet wide, 5 feet across, and 6 feet deep. So, the volume of dirt being removed would be 3 x 5 x 6 = 90 cubic feet.