0
What else can I help you with?
What size amp circuit breaker should be used for 110 outlet?
The size breaker you use is determined by the size wire used in the circuit. If you use AWG #12/2 wire then use a 20 amp breaker. If you use AWG # 14/2 then use a 15 amp breaker.
What size breaker do you need for two 60W bulbes 110 volts?
It is not the number of bulbs that you worry about. It is the wire size that is your concern. If the circuit is wired with AWG 12/2 wire then use a 20 amp breaker. If it is wired with a AWG 14/2 wire then use a 15 amp breaker. You are protecting the wiring with the correct size breaker.
Is it safe to use 10 gauge wire on a 20 amp breaker for a microwave?
No, 10 gauge wire requires the use of a 30 amp breaker. A 20 amp breaker is only used on 12 gauge wire.
What breaker do you use for 10 2 wire?
Use a 30 amp breaker.
Should 25 amps breaker be replaced by 20 amps?
For typical residential house wiring 12 AWG wire is required for a 20 Amp breaker. If you change out the breaker for a 25 A breaker you would have to rewire the circuit with 10 AWG. In that case you could up the breaker to 30 Amps. All outlets and switches should be rated at the same voltage and current as the breaker.
What size amp circuit breaker should be used for 110 outlet?
The size breaker you use is determined by the size wire used in the circuit. If you use AWG #12/2 wire then use a 20 amp breaker. If you use AWG # 14/2 then use a 15 amp breaker.
What is the maximum electrical load that a 110 amp breaker can handle?
A 110 amp breaker can handle a maximum electrical load of 110 amps.
What size breaker do you need for two 60W bulbes 110 volts?
It is not the number of bulbs that you worry about. It is the wire size that is your concern. If the circuit is wired with AWG 12/2 wire then use a 20 amp breaker. If it is wired with a AWG 14/2 wire then use a 15 amp breaker. You are protecting the wiring with the correct size breaker.
What is the appropriate wire size for a 25 amp breaker?
The appropriate wire size for a 25 amp breaker is typically 10 gauge wire.
What is the appropriate wire size for a 30 amp breaker?
The appropriate wire size for a 30 amp breaker is typically 10 gauge wire.
What is the recommended wire size for a 20 amp breaker?
The recommended wire size for a 20 amp breaker is typically 12-gauge wire.
What is the recommended wire size for a 25 amp breaker?
The recommended wire size for a 25 amp breaker is typically 10 gauge wire.
What is the recommended wire size for a 30 amp breaker?
The recommended wire size for a 30 amp breaker is typically 10 gauge wire.
What is the recommended wire size for a 50 amp breaker?
The recommended wire size for a 50 amp breaker is typically 6-gauge wire.
What is the recommended wire size for a 60 amp breaker?
The recommended wire size for a 60 amp breaker is typically 6-gauge wire.
Can a 40 amp breaker not a 4 amp breaker be used to replace a 35 amp breaker for ac unit?
No, it is not recommended to replace a 35 amp breaker with a 40 amp breaker for an AC unit. Breakers are designed to protect the circuit and the equipment, so using a higher rated breaker can lead to overheating and potential damage. It is best to use the correct amperage rated breaker for the equipment.
Is the wire running to a 20amp breaker different from a wire running to a15amp breaker?
Yes, a 20 amp breaker requires AWG # 12 copper wire. A 15 amp breaker requires AWG # 14 copper wire.
