answersLogoWhite

0

The Spa should be powered by a GFCI no matter how far away outlet is located.

Answer for USA, Canada and countries running a 60 Hz supply service.

Every receptacle in a bathroom is required to be GFCI protected. Outside of a bathroom, anything within 6 feet of the outside edge of a sink is required to be GFCI protected. The code does not define "sink" but any reasonable person would consider a spa as qualifying under this requirement. -- Sparkfighter

<><><>

As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.

Before you do any work yourself,

on electrical circuits, equipment or appliances,

always use a test meter to ensure the circuit is, in fact, de-energized.

IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB

SAFELY AND COMPETENTLY

REFER THIS WORK TO QUALIFIED PROFESSIONALS.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Electrical Engineering

How far is the required distance between electrical outlet and sink in an office building?

Before the code requiring all outlets to have GFCI protection that at within 6' of a water source you were required to install the outlet at least 6' from the sink. Now, there is no minimum distance but all outlets must be GFCI protected that are installed within 6' of a water source.


Why does a newly installed GFCI outlet show open ground on the tester?

Ground wire is loose or disconnected somewhere in that circuit.


Do you need a gfci outlet if you have a gfci breaker?

Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.


Do you wire a gfci outlet differently?

No, except that you insert the wires into the holes on the back of the outlet. The power in connects to the LINE side of the outlet and power out connects to the LOAD side of the outlet. This is clearly marked on the back of the outlet. This will not only protect the outlet with the GFCI installed but all outlets receiving their power from that GFCI. If you do not want to protect the outlets receiving power from the outlet then connect that outgoing wire to the LINE side also. But know that only the outlet with the GFCI will be protected and all other outlets will not be GFCI protected.


How do you wire an outdoor timer into a GFCI outlet?

I assume you are hard wiring it and not plugging it in. The power coming into the GFCI outlet connects to the line side of the GFCI outlet. If you want the outdoor timer protected by the GFCI then connect the wire going to the timer to the load side of the outlet. If you do not want the timer protected then connect it to the line side. On the back of the GFCI if you look closely you will see Line &amp; Load marked on the back.

Related Questions

Is it necessary to install a GFCI outlet in the bathroom for safety reasons?

Yes, it is necessary to install a GFCI outlet in the bathroom for safety reasons.


How to install a GFCI outlet?

To install a GFCI outlet, first turn off the power to the circuit. Remove the old outlet and disconnect the wires. Connect the wires to the new GFCI outlet following the manufacturer's instructions. Secure the outlet in place and turn the power back on to test the outlet.


How do you install a GFCI circuit?

This article explains it in detail: Learn How To Safely Install a GFCI Outlet at The Home Depot


How can I install a GFCI outlet with a light switch in my bathroom?

To install a GFCI outlet with a light switch in your bathroom, you will need to first turn off the power to the circuit. Then, remove the existing outlet and switch from the wall. Install the GFCI outlet in place of the old outlet, making sure to connect the wires correctly. Next, wire the light switch to control the light fixture. Finally, test the GFCI outlet and switch to ensure they are working properly before turning the power back on.


What is the minimum distance from the rim of a kitchen sink can you install a GFCI receptaclel?

An electrical outlet can not be placed behind a sink. If the outlet is witin 6 feet of a sink it must be GFI protected.


How to install a GFCI outlet in a bathroom?

To install a GFCI outlet in a bathroom, first turn off the power to the circuit at the breaker box. Remove the old outlet and disconnect the wires. Connect the new GFCI outlet following the manufacturer's instructions, making sure to connect the line and load wires correctly. Secure the outlet in place and turn the power back on to test it.


Is it necessary to install a sump pump on a GFCI outlet for safety reasons?

Yes, it is necessary to install a sump pump on a GFCI outlet for safety reasons. GFCI outlets help prevent electrical shocks and protect against water damage in case of a malfunction.


How do I properly install a GFCI outlet in my home?

To properly install a GFCI outlet in your home, first turn off the power to the circuit you'll be working on. Remove the old outlet and disconnect the wires. Connect the wires to the corresponding terminals on the GFCI outlet, following the manufacturer's instructions. Secure the outlet in place and turn the power back on to test the outlet. If it trips, there may be a wiring issue that needs to be corrected.


What are the differences between a GFCI 15 amp and a GFCI 20 amp outlet?

The main difference between a GFCI 15 amp and a GFCI 20 amp outlet is the maximum amount of electrical current they can handle. The 20 amp outlet can handle higher power loads compared to the 15 amp outlet.


How can I install a GFCI wall outlet in my home for added safety?

To install a GFCI wall outlet in your home for added safety, follow these steps: Turn off the power to the outlet at the circuit breaker. Remove the old outlet and disconnect the wires. Connect the wires to the new GFCI outlet following the manufacturer's instructions. Secure the outlet in place and cover with the faceplate. Turn the power back on and test the outlet to ensure it is working properly.


How do I install a GFCI outlet with 4 wires?

To install a GFCI outlet with 4 wires, first turn off the power to the circuit. Connect the black and white wires to the LINE terminals and the red and white wires to the LOAD terminals on the GFCI outlet. Make sure to follow the manufacturer's instructions and consult a professional if needed.


How can I safely install 2 GFCI outlets on the same circuit?

To safely install 2 GFCI outlets on the same circuit, you should connect the line wires from the circuit to the line terminals on the first GFCI outlet, then use additional wires to connect the load terminals of the first GFCI outlet to the line terminals of the second GFCI outlet. Make sure to follow the manufacturer's instructions and consult a licensed electrician if needed.