Number eight wire (AWG 8) can typically carry around 40 to 55 amps, depending on factors like insulation type, ambient temperature, and installation conditions. For example, in a residential setting with copper wire and typical insulation, it is often rated for 40 amps for continuous loads. Always consult the National Electrical Code (NEC) and local regulations for specific applications and safety considerations.
50 amps.
140 AMPS
Aluminum 4/0 wire car carry 180 amps at at 75 degrees Fahrenheit or 205 amps at 90 degrees. .
If you mean 2/0 copper wire it is rated 175 amps. # 2 wire is 115 amps. If you are referring to 2.0 metric it is rated 15 amps.
It depends on the rated voltage of its secondary.
50 amps.
140 AMPS
150 amps
A wire with the stats 14awg and 105 degrees Celsius can carry up to 39 amps.
Aluminum 4/0 wire car carry 180 amps at at 75 degrees Fahrenheit or 205 amps at 90 degrees. .
The number of amps a transformer can carry on its secondary side depends on its power rating (in watts or VA) and the voltage of the secondary winding. You can calculate the current (in amps) using the formula: Amps = Watts / Volts. For example, if you have a 1000 VA transformer with a 10V secondary, it can carry 100 amps (1000 VA / 10V = 100A). Always ensure the transformer is rated for the desired load to avoid overheating or damage.
60 amps
If the total bank is 750kVA, full load amps is 902A.
If you mean 2/0 copper wire it is rated 175 amps. # 2 wire is 115 amps. If you are referring to 2.0 metric it is rated 15 amps.
It depends on the rated voltage of its secondary.
The amount of current (amps) that pylons, or transmission towers, carry can vary significantly depending on the voltage of the transmission lines and the specific design of the system. High-voltage transmission lines can carry anywhere from hundreds to thousands of amps. For example, a typical high-voltage line operating at 500 kV might carry around 1,000 to 2,000 amps. Overall, the exact current is determined by the needs of the electrical grid and the load being supplied.
30 amps is how much a 10-2 wire will carry at 110 feet. 10 gauge wire is only good for thirty amps per the national electrical code. Using 80% of the breakers usage you will actually be getting only 24 amps.