answersLogoWhite

0

The amp draw of a deep freezer typically ranges from 3 to 10 amps, depending on its size and efficiency. Smaller models may use around 3-5 amps, while larger or more energy-intensive units can pull up to 10 amps or more. To determine the exact amp usage, it's best to check the manufacturer's specifications or the freezer's energy label.

User Avatar

AnswerBot

4w ago

What else can I help you with?

Related Questions

How many amps does 500 watt halogen pull?

At 120 volts it will pull 4.166 amps. At 240 volts it will pull 2.08 amps.


How many amps does a 400w power inverter pull?

Aprox 12 amps.


How many amps in a small table lamp?

A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.


How much does a basic home freezer pull in amps?

10 to 12 amps at 110 volts, as a surge when the motor first starts up, then about half that during the rest of the cycle.


How many amps would a slow cooker at 250 watts pull at 110 volts?

About 2.25 Amps.


How many amps will an 12000 btu air conditioner pull?

at 230v it will use 5 to 6 amps


How many amps does a Kenmore chest freezer pull?

How many amps really depends on the size of freezer...but, normally during the START cycle (that lasts about 10-seconds, from the time the compressor kicks on, until it gets going), the surge of START can take 10-12 amps, though most freezers can comfortably start in a 68-degree F room at about 8-amps. Once the compressor is running, it takes 2-3 amps to keep the compressor running. When the compressor kicks off (standard cycle is about 80% off, 20% on for a new freezer), then it draws NO POWER at all, unless it has a heated lid-seal, and then it will draw about 1-amp...possibly on a timer cycle (<100-watts). Keep in mind...that <600 Kw/h rating for the energy star is based off of a MOSTLY-OFF cycle time...if that compressor has to run a lot (because you placed it on your back deck, or in your HOT garage) then you can expect power consumptions to double, triple, etc.!


How many amps will an 8000 btu air conditioner pull?

10.92 Amp


How many amps per leg can you pull on a 50 amp 3 phase connector?

On a 50 amp 3 phase connector, you can pull 50 amps per leg. This means that each of the three phases can carry up to 50 amps individually, resulting in a total capacity of 50 amps per leg.


What is the ampere range value of transformer?

This typically has to do with how many amps you can safely pull from the secondary of the transformer.


How many locked rotor amps does a dual phase 4 ton air conditioner pull?

5


How many kilowatts does 7 amps pull?

Seven amps pulls zero kilowatts . W = A x V. You need to state a voltage to multiply the amperage by to get watts. Then divide by 1000 to get kilowatts.