If your generator is rated at 1000 watts continuous......and you are using 120V.....available amps are 1000/120 =8.3 .
There are zero amps in 50 watts. The equation for amperage is, I W/E. Amps = Watts / Volts. As you can see if there is no voltage stated the amperage can not be calculated.
978 watts
There is zero watts in 10.5 amps. Watts is the product of amps times volts. Without the voltage value given, this question can not be answered.
There are zero watts for 4000 amps. The formula for watts is; W = A x V, so you see a value for voltage has to be stated to give an answer.
You need amps
1.9 amps
To calculate the amps for a given amount of watts, you need to know the voltage of the circuit. If we assume a typical household voltage of 120V, then the calculation would be 9000 watts / 120V = 75 amps.
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
To calculate the watts needed for 26 amps, you would multiply the amperage by the voltage. For example, if the voltage is 120V, the calculation would be 26 amps x 120V = 3120 watts.
To calculate the number of amps, you need to know the voltage of the circuit. Using the formula Amps = Watts / Volts, if the voltage is 120V, then 9.8kW at 120V would be approximately 81.67 amps.
600 This depends on the voltage Voltage x Amps = Watts ex. At 120 volts 5 amps WILL BE 600 watts But at 110 Volts (Some house voltage), it will be 550 watts And at 277 Volt (commercial-Industrial Voltage), it would be 1385 Watts If you know Watts (Like a 75w Incandescent Lamp) and the Voltage: Watts / Volts = Amps So 75w / 120v = 0.625a The last would be Watts / Amps = Volts 600w / 5a = 120v
To calculate the amps, divide the power in watts by the voltage. If the voltage is 120V, then 320 watts would be approximately 2.67 amps.
To convert watts to amps, you can use the formula: Amps = Watts / Volts. Assuming a standard voltage of 120V, 1500 watts would be equivalent to 12.5 amps (1500 watts / 120 volts = 12.5 amps).
It depends on the voltage source. watts = voltage * voltage / resistance and amps = voltage / resistance example 1: To produce 600W from a 120V source, you need a resistor of size 120V*120V/600W = 24 Ohm. This would pull 120V/24 Ohm = 5 amps. example 2: To produce 600W from a 240V source, you need a resistor of size 240V*240V/600W = 96 Ohm. This would pull 240V/96 Ohm = 2.5 amps.
To convert amps to watts, you need to know the voltage of the circuit. Using the formula Power (W) = Current (A) x Voltage (V), if the voltage is 120V, then 0.71A x 120V = 85.2 watts.
To convert watts to amps, you can use the formula: Amps = Watts / Volts. For example, if you're using a 120V circuit, 450 watts would be equal to 3.75 amps (450 watts / 120 volts = 3.75 amps).