Answer for USA, Canada and countries running a 60 Hz power supply service. 230 to 240 volts on any size two pole breaker on single phase installations. The voltage varies from location to location from different utility power companies.
Chat with our AI personalities
No, A double pole breaker is going to give you 220 volts. 220 Volts is too much voltage for a 110 Volt outlet to handle. == Answer== Better to pull the duplex 30a and install to single-pole 20a breakers...if one kicks out, you will know which side the problem's on. And there's no problem with running a 20a circuit over 10awg wire.
Washing machines in the U.S. operate on 120 volts. That requires a single pole 20 amp breaker and wired with 12/2 w-ground wire. Black to the breaker, white to the neutral bus bar, and copper ground to the ground bus bar.
You have a double pole breaker for 240Volt supply. The maximum current is 15 amp.
can a 20 amp double pole circuit breaker be used for 2 different 120 v circuits using 14 - 2 wire
In North America a two pole breaker will be used in the distribution panel for a supply of 240 volts for a 240 volt load.